What is the reason why the light in the middle of the bathroom bomb is sometimes on and sometimes no

Poor contact.

The bathroom bath bomb refers to the lighting here sometimes on, sometimes not on, mostly because of poor line contact. It is recommended to check whether the wiring of the lamp head and switch post is loose or not, and if it is tightened, the problem will be solved.

If not, it is recommended to contact a professional maintenance personnel for on-site inspection and repair. Patience.

The lamp holder is in poor contact, and the power is off, dismantle the lamp, and use a tool to pull up the shrapnel in the lamp holder.

The switch is easy to do with sound, but the switch is not in good contact, if there is no possibility that the line or the bulb is not in good contact.

The lights are not working well, or the threads are loose.

What is the reason why the light in the middle of the bathroom bomb is sometimes on and sometimes not? The lamp is not good, or the wire is loose, the switch is easy to deal with, the switch is not in good contact, if there is no possibility that the line or the bulb is not in good contact, the lamp holder is not in good contact, the power is off, the lamp is removed, and the shrapnel in the lamp holder is pulled up with a tool, and the contact is not good.

I went to sell the light bulb and found that the lamp was no problem I changed a light bulb or it didn't work The switch was no problem with this side The electricity test There was no electricity in the lamp head Where should it be the problem? What should be wrong and how to fix it?

Oops, how can this be? The reasons for the analysis are as follows:1

It may be caused by poor contact. It is that at the time of installation, the wiring is not solid. 2.

Try a different light bulb. It could also be that the bulb is long and a little old. But this is extremely unlikely.

All in all, it is not a big deal. For the sake of safety, remind friends to find a professional to take a look, please consider whether the above is true or not. I wish you a speedy fixing of the lights.

You can check if it is due to poor contact.

It is caused by poor contact, check whether the wiring of the lamp head and switch post is loose, and the fault will be eliminated after tightening.

Check that the bulb is securely installed, that the switch is damaged, and that the end of the wire is loose.

1. There are many reasons why the bath bomb light does not light up, but no matter what kind of bulb does not light up, you must carefully find out the problem. 2. a light bulb. In this case, you can check whether the bulb is in poor contact or if a single bulb is burned, in this case, you can change the bulb.

Check to see if the top wire on the bath bomb is burned, and if so, replace it if it is safe to do so. 3. Neutral contact. Check whether the zero line contact of the bath bomb is good, and whether the lamp head is loose.

Open the switch panel to see if the switch is in bad contact and whether the link line is interrupted. The power of the bath bomb lamp is too large, and the line heats up quickly and burns out. In this case, first of all, we must understand the power of the bath bomb, the wire used by the bath bomb with high power is generally more than 4 square meters, and it is best to use 6 square millimeters), copper wire, do not be greedy for cheap lead wire.

Tighten it, and if it doesn't work, check the wiring connector inside.