-
Anonymous users2024-01-23The two holes of the socket are glowing with a test pen, so if the lights at home are not on, it is the zero line of the entrance line is disconnected. Under normal circumstances, only one hole should be measured with a voltage tester to emit light, and the other hole should not emit light.
-
Anonymous users2024-01-22Does the air switch trip? There is also a check to see if the air switch of the meter box is tripping - to check the cause of the trip, it is best to have it checked by a professional.
Reason bai
[All the sockets in the kitchen at home are out of power, but there is electricity in other rooms], it is said that there is a problem with the wiring of the sockets in the kitchen of Neiming. >>>More
Check whether the power switch at the distribution box of the upper level is active (at the watt-hour meter).
Both ports are in the line of fire, and the zero line is short. There must be a place where the zero line collides with the fire line and is burned short below zero in that place, and the zero line inserted in the row sticks to the fire line, and both ports are fire wires. When the power goes out, you can connect it.
To check the socket of the bathroom to confirm that it is good, and then find it from the bedroom, it is estimated that the power supply of the bathroom is drawn out of the bedroom, find a power cord directly across the bathroom, see if the socket has electricity, there is electricity is the original power cord is broken, change the wire. The lack of power is the broken outlet. >>>More
Start with the distribution box: remove the wiring heads (or empty openings) of each other room, and test them separately to see which one it is. Then go to that room or route, check each socket one by one, you can finally determine the problem, and then eliminate it!