The sockets on the wall in the rooms at home are out of power, but the kitchen and toilet are there,

Updated on Kitchen 2024-04-05
4 answers
  1. Anonymous users2024-01-23

    Both ports are in the line of fire, and the zero line is short. There must be a place where the zero line collides with the fire line and is burned short below zero in that place, and the zero line inserted in the row sticks to the fire line, and both ports are fire wires. When the power goes out, you can connect it.

  2. Anonymous users2024-01-22

    Generally, the circuit of the socket and the lighting circuit should be different circuits, and the zero line will be charged if the zero line is broken.

  3. Anonymous users2024-01-21

    You have to find a professional repairman, it's too dangerous to do it yourself. Is it estimated that there was a mistake during installation?

  4. Anonymous users2024-01-20

    This situation is like the zero line is broken. Do you first check whether the sub-switch that is open in the air has fallen all the way down the wall? Then check the problem.

Related questions
3 answers2024-04-05

Reason bai

[All the sockets in the kitchen at home are out of power, but there is electricity in other rooms], it is said that there is a problem with the wiring of the sockets in the kitchen of Neiming. >>>More

4 answers2024-04-05

Check whether the power switch at the distribution box of the upper level is active (at the watt-hour meter).

1 answers2024-04-05

It's a matter of line!

The danger of mains power is too great, find a maintenance worker to take a look, if you know the electrician foundation, you have seen whether the inner line of the socket is broken! >>>More

10 answers2024-04-05

Hello! If you are not afraid of the big spark plugged in and the plug and socket burn out, you can also try it yourself, first unplug the plug on the socket in the living room and the room to send the power to try, if you don't jump is those electrical problems, and then try one by one, which will trip is broken to be repaired; If there is no single swing pole on the socket and the plug is jumping, it is a wiring problem (the switch of the light should be turned off), and this can only be done by inviting a professional electrician. >>>More

1 answers2024-04-05

If you can't push it, the circuit is faulty, and you can ask the community maintenance personnel to come to repair.