-
Anonymous users2024-01-23First use paint stripper to drag paint the home, level it with putty and then treat it with sandpaper, and then buy polyester mixed paint, including primer and topcoat, and the blending ratio is the ratio of paint thinner curing agent 1:1:1.
Brush the primer twice with a wool board brush, sander twice, and then brush the topcoat twice.
-
Anonymous users2024-01-22It's better to find a painter and compare what they do professionally and what they can't do themselves, wasting energy and silver.
The old paint film must be sanded to increase the adhesion of the new paint film. If the light color covers the dark color, it needs to be sanded a little harder, or directly scrape the putty and then spray paint.
Use No. 180 sand first.
The paper will clean off the surface coating, you can buy some putty to repair the holes, and after drying, clean and polish them with 320 and 400 sandpaper, and spray paint them in oil (your favorite color). >>>More
You can't even look at the new ones you buy, and you still want to brush them yourself. You don't waste the furniture, you toss around, okay.! >>>More
All kinds of furniture paint construction technology - wood paint 1) on the coloring oil or toning oil (note: limited to the project with discoloration requirements, this process is not required for ordinary projects. 2) Brush the varnish protective primer (if there is no one process, i.e., this is the first process) If the varnish is brushed while maintaining the original color, then the surface must be cleaned and the first protective primer must be applied immediately after the material is purchased at the construction site. >>>More
Patience is the most important thing, because it takes a lot of time. You can go to these websites like One Home Network. A lot of this knowledge.