How to do the septum sound insulation of the spire room with a suspended ceiling, and whether to dis

First do the top of the top layer, and then use the woodworking board to make an arc-shaped edge model and hang it down, the arc of each step has to make two (up and down) the same model, use a five-centimeter board or a nine-centimeter board to enclose the arc-shaped edge to become a step, and then use gypsum board to close the five-centimeter board (or nine-centimeter board) on the line, layer by layer.

1.The ceiling can be designed with a concave shape 2It should not be uneven or have sharp corners3The ceiling should not be designed with a mirror 4The color of the ceiling should be light and not heavy5Hidden light strips make up for the lack of lighting.

All with optical fiber, before the ceiling is installed, if it is a round ceiling with a diameter of 3 square meters, you have to make more than 100 holes in the ceiling, each hole is installed with an optical fiber, and the end of the light is a small bulb.

Black lines can be done with a lot of things. You can use black stainless steel lines, which is a very commonly used material, in addition to the color, there is also a metallic texture, so the embellishment is very decorative. When this material is used, it is generally primed on gypsum board and directly glued with glass glue. >>>More

The bedroom roof in the picture below is also mostly used, and it is all the same. >>>More