How to solve the old blockage of the drain after the toilet is displaced. Urgent

The old blockage of the drain after the toilet is displaced, which is generally caused by a blockage at the bottom outlet or improper alignment of the toilet bowl after displacement, can be solved by the following seven steps:

Tools: 1 universal wrench, 1 plastic glove, 1 cardboard.

1. First, use a universal wrench to unscrew the screws on both sides of the toilet.

2. Remove the toilet bowl and place it on top of the cardboard. The purpose of this step is to prevent contamination of the clean floor.

3. At this time, the drain at the bottom of the toilet leaked out.

4. Wear plastic gloves and pick out the blockage inside.

5. After cleaning, bring the toilet bowl here, make sure that the toilet mouth is aligned with the drain outlet, and then let go.

6. Fix the screws on both sides of the toilet.

7. Connect the water pipe at the back of the toilet, and you can flush the water and continue to use it.

Notes: It is best to throw away the plastic gloves after cleaning, because the dirt on the drain is sticky and dirty, and it is not easy to clean.

What should I do if the toilet is lightly clogged? Top 10 most useful solutions!

1. In fact, you can find a half-inch wide bamboo strip and stretch it into the toilet to dredge it to solve the problem.

2. In many cases, the toilet flushes more and flushes itself, especially if it is a soluble or breakable item such as soil and paper. If it's greasy, then rinse a basin of boiling water to melt it.

3. Buy some caustic soda, boil water to melt the caustic soda, and pour it into the toilet. After ten minutes, everything will be cleared.

4. Buy a bottle of big Coke and come back and drink the drink first, and then cut off the bottom of the Coke bottle After cutting it off, put it upside down in the toilet bowl and hold the bottom with your hand and pump it up a few times, 5. Use an appropriate amount of oxalic acid (usually you can also use oxalic acid to clean the toilet, just neutralize it with urine alkali to make the toilet unblocked).

6. You can buy a loach and put it in the squatting toilet, pour it into the toilet with warm water, and the loach will desperately drill down when it is hot to achieve the purpose of the toilet. If there is nothing hard, I think it will generally pass, 7, the old-fashioned mop, fill the toilet with half of the water, and then use the mop to press a few times into the hole, the action should be fast, rely on the pressure to get it through, 8, you can go to the market to buy a puff, and then slam a few times, use it once every half a month, it will not be blocked, 9, you go inside to half of the water, use a round mop, or use a round-headed soft brush, aim at the hole in the sewer, pound hard, 10, use a relatively long soft snorkel to insert it, Ventilate inside, then flush; I tried it and it worked really well.

If the distance of displacement is too long, then what brand of shifter is easy to block, you can directly connect the tee from the riser, install a concealed water tank and a wall-hung toilet, the wall-mounted toilet sewage outlet is relatively high, there is a drop, and the drainage will be better.

Buy a wall-mounted toilet or redirect the toilet and build a half-height wall at the back to make the most of the space without changing its position.

In addition, after raising the toilet as a whole, change the position of the drain.

It is best to move the position of the drain, but it is necessary to pass the permission downstairs, so although it is troublesome, as long as you are careful to do it, you can ensure that there is no water leakage and sewage problems.

Back in place. Because the sewer connection is overwhelmed and offset, the water is not smooth.

Wipe the water dry and seal it with the plugging king.

The old blockage of the toilet after the displacement of the toilet posture is generally caused by a blockage at the bottom outlet, or the misalignment of the toilet bowl after the displacement of which bush, which can be solved by the following seven steps:

Tools: 1 universal wrench, 1 plastic glove, 1 cardboard.

1. First, use a universal wrench to unscrew the screws on both sides of the toilet.

2. Remove the toilet bowl and place it on top of the cardboard. The purpose of this step is to prevent contamination of the clean floor.

3. At this time, the drain at the bottom of the toilet leaked out.

4. Wear plastic gloves and pick out the blockage inside.

5. After cleaning, bring the toilet bowl here, make sure that the toilet mouth is aligned with the drain outlet, and then let go. Slow down.

6. Fix the screws on both sides of the toilet.

7. Connect the water pipe at the back of the toilet, and you can flush the water and continue to use it.

Notes: It is best to throw away the plastic gloves after cleaning, because the dirt on the drain is sticky and dirty, and it is not easy to clean.

Clean up the blockage: Use a toilet unclogger or pipe cleaner to clean the sewer pipe and remove the blockage from the clump sensitive plug.

Replace the sewer pipe: If it is still clogged after cleaning, it may be caused by the sewer pipe being bent or at the wrong angle, and the sewer pipe needs to be replaced.

Adjust the position of the toilet: If the angle of the sewer pipe is not correct after the toilet is displaced, you can adjust the position of the toilet so that it is vertically aligned with the sewer pipe.

Install booster pumps: If the sewer pipes are too far away or the high permeability difference is too large, a booster pump can be installed to increase the drainage capacity.

Seek professional help: If none of the above methods can solve the problem, it is recommended to seek professional help and have it checked and repaired by a professional.

What to do if the toilet is clogged.

1. Pipeline dredging agent.

Pipe dredging agent is the solution to the problem of clogged toilets, you only need to buy a bottle of pipe dredging agent, and then pour some into the toilet, in the use of dredging tools such as leather puffs, you can quickly solve the problem of clogged toilets.

2. Detergent hot water.

The flush toilet may be blocked because there is too much grease and dirt in the toilet, so you can use dish soap and hot water to solve the problem. First pour an appropriate amount of dish soap into the toilet, then pour boiling hot water, then use a leather puff to rub it a few times, wait for a while, and then press the flush switch of the horse to destroy the eggplant bucket.

3. Baking soda, white vinegar, hot water.

Baking soda white vinegar, one alkali and one acid, these two will have a chemical reaction when mixed together, which will have a very good decontamination effect. Therefore, pour baking soda white vinegar into the toilet, wait until the baking soda white vinegar has fully reacted, pour in the hot cover water, and then use a leather puff to pluck it a few times, and press the flush switch of the toilet to easily dredge the toilet.