-
Anonymous users2024-01-23There are three situations where there will be a small amount of water leakage, 1. The rubber ball valve is broken, the seal is not tight, and there is water leakage, as long as it is replaced. 2. The rubber gasket of the drain port under the ball valve is aging and the sealing is not tight, so it needs to be replaced. 3. The connection between the spherical float of the water tank and the water inlet switch is loose, the float is in place and the switch is not closed, resulting in the water inlet does not stop, and the water flows out from the upright discharge pipe after the water is full, as long as the connection between the float and the water valve switch is tightened.
Cause of water leakage:
1. The internal parts of the water tank are aging; >>>More
Every time the toilet tank is flushed, the hole is sprayed, how to solve it, the picture is not clear, if the toilet is blocked, it needs to be dredged, if the water tank is leaking, see if the gasket is broken, and you can change the gasket.
1. The float cargo float of the inlet valve is stuck, and the float (float) can be pulled up and down by hand, and it can move up and down smoothly under normal circumstances. >>>More
You can go outside to buy a plastic flush bucket, 60 yuan, flush in two gears, and then borrow a tube, it will be more unsightly, there is no way, you can only do this without changing the toilet.
The brand is different, the accessories are also different, it depends on the overall reason, the general direction is; The suction power is large, the drainage is smooth, the speed block of the plug in the water tank is closed, open the water tank cover to see if the small water filling pipe of the water supply valve in the water tank has fallen off from the overflow pipe