When the kitchen hood is open, press the motor first and then press the switch, right?

Updated on Kitchen 2024-04-15
1 answers
  1. Anonymous users2024-01-23

    The photoelectric switch should be used as the start button of the motor, and whether the action is one-way or reciprocating? That is, it reverses when it hits the travel switch, and stops when it reaches a specific position?

Related questions
1 answers2024-04-15

That's because the other doors and windows are tightly closed and the sewer makes up the air – this can be avoided by opening a window in the other room when the hood is turned on.

1 answers2024-04-15

The smoke outlet pipe is too long, the fan power is too small, and the smoke exhaust hood is too high from the ground. It is best to install the fan at the inlet end of the smoke hood, and ensure that the pipe does not leak when installed at the far end.

1 answers2024-04-15

"Mask" with toilet paper or paper towelsStick toilet paper or paper towels on the tiles, spray detergent on them and leave them for a while, just like a woman applying a mask, not only will the detergent not drip everywhere, but the grease will stick to it all. Just tear off the toilet paper and wipe it once or twice with a clean cloth dipped in water, and the tiles will look like new. For tile tiles with heavy oil stains, you can stick toilet paper or paper towels on the tiles overnight, or replace toilet paper with cotton cloth, and wait for the oil stains to be fully absorbed by the paper towel, and then wipe them with a damp rag. >>>More

8 answers2024-04-15

Do you exhaust through the flue? If so, just put the whole downwind valve on the vent of your range hood.

4 answers2024-04-15

Cabinets, because of the size of this design, must be considered first.