What to do if the ceiling of the bathroom canopy is moldy

There is no more than one reason for mold, and that is dampness.

Controlling humidity in the bathroom is obviously not possible, to remove mold, and to remove it cleanly, conventional cleaning methods are feasible, but it will be difficult to operate, it is recommended to use mold removers.

The fungal remover is a kind of agent that relies on the principle of strong oxidation, which can forcibly oxidize and decompose the pigment secreted by the mold and mold, so as to achieve the bleaching effect.

There is also anti-mildew, after the mold is removed, then spray the anti-mildew agent, so that the anti-mildew ingredient can stay on the canopy to play a role in mildew prevention, to ensure that there will be no mildew in the future.

Remove the original ash, scrape the putty, and apply the anti-team paint, and it is best to install a lead gusset.

Redecorate with a new integrated ceiling.

Now to help you analyze two factors of mold.

First, there is a water leak in the bathroom of your upstairs house, which penetrates into the canopy of your bathroom and causes the canopy of your bathroom to become moldy.

Second, to eliminate water leakage, which is the mold caused by the material used in the decoration of the bathroom in your home without completely drying out.

Of course, there are other reasons.

It mainly depends on whether the ceiling of your canopy is made of aluminum gusset material or similar materials that cannot be waterproof and anti-fog.

If the aluminum gusset is still moldy, it is recommended that your bathroom window should be opened casually, keep it dry, and the ventilation should be good, so as to reduce the amount of mold.

If not, you can go to the market to buy materials with waterproof and anti-fog functions to make ceilings.

If it is determined that the above house is leaking after on-site inspection, the people above will find them to do waterproof treatment, which can completely eliminate the mold phenomenon.

Hope it helps.

The bathroom is too humid and moldy is not a problem.

Try to keep your bathroom as ventilated as possible.

With waterproof latex paint, brush it.

If you want to solve the problem in the long run, replace the aluminum gusset ceiling, even disassemble and install it for two or three days, drying is not realistic, and it takes time to drive away the tide. Wish.

Due to the heavy humidity in the bathroom, if the general materials are not treated with mildew, it is easy to fall or become moldy, it is recommended that you replace them with aluminum buckles or aluminum buckles, and use the keel to re-hang once, the price is not very expensive. The cheap one is only about 50 yuan 1 square meter, and the construction is simple.

Eliminate water leaks. The situation can be improved by removing the original ceiling, using elastic putty caulking, and attaching nylon straps.

Cut the plexiglass plate to the size of the ceiling! Then take the thinnest woodworking sandpaper on the back and sand it aside! Then spray a layer of white paint on its back! Then fasten the ceiling with large glass staples around the perimeter! That's it! It's also waterproof!

Try to keep your bathroom ventilated and don't use moldy materials.

If you want to solve the problem in the long run, change the aluminum gusset ceiling, even dismantle and install it for two or three days, drying is not realistic, and it takes time to drive away the tide.