-
Anonymous users2024-01-23The float (barrel) rod screw inside the tank needs to be adjusted. Or bend the shaft downwards. Right away. Open the water tank and try it!
-
Anonymous users2024-01-22There is a problem with the float, or the underside leather pad is broken.
-
Anonymous users2024-01-21The float may be stuck at the connection button, causing an imbalance in water pressure.
Tap the float, it is the white one on the left side of the inlet valve, different toilets have different forms, but they are all about the same.
Reason: The float lifting work is not sensitive, and the water consumption required to complete the flushing and discharge of the normal water inlet cannot be guaranteed, or the water inlet valve cannot control the water intake, and the water has been continuously supplied to the water, which greatly exceeds the water level carried by the water tank, resulting in the water flowing down to the nozzle above the drain valve to the urinal, and even to the ground. If such a problem is found, it is necessary to overhaul and replace the inlet valve accessories in time. >>>More
1. Whether there are cracks in the toilet water tank. If there is a problem with the burning of the toilet, cracks may appear, causing the toilet tank to leak. Although it can be used with proper repairs, it is advisable to replace the toilet bowl as it may leak after repairs. >>>More
The machine is stuck, move it, otherwise the wastewater.
If the water level limit device of the toilet tank is too loose to check the socks selling, or if it is set too high, it will cause the water level to exceed the set limit and flow into our toilet, and the toilet water flow will not stop. We can check the interface between the two to see if it is loose or broken, if it is loose, we will fix it with empty wire or something, but if it is broken, we need to replace the pipe.