The toilet at home is full and continues to enter the water, and the water inlet pipe keeps bubbles

Updated on Toilet 2024-04-27
3 answers
  1. Anonymous users2024-01-23

    The float in the tank drives the water inlet valve of the water tank, when the float floats up and the valve is not closed, and the water continues to enter, it must be a problem with the valve.

    1.Check the valve to see if the link between the float and the valve is loose or the valve is broken, and then it's good to go.

    2.If it is an old-fashioned float tank fitting, it may be that the height of the float is not adjusted properly, or the valve for water inlet is open.

    3.If it is a new tank fitting without a float, it may be that the water inlet part is too tight or fails.

    4.Generally, toilets come with installation instructions for tank fittings, you can look at the manual, or go to a building materials store to find one.

    5.If it doesn't work, and your home is an old-fashioned float tank fittings, it is recommended that you buy new tank accessories and find someone to replace them, the price of the tank accessories is about 30-50 yuan.

  2. Anonymous users2024-01-22

    It is likely that the float in the tank is broken or the installation position has changed, open the tank cover, just adjust it slightly, if you find it difficult, you can ask the plumber for help, in this way, it will be fine soon, but there will be some costs. Hope it helps, FYI.

  3. Anonymous users2024-01-21

    The water level is broken, usually the one on the left

Related questions
The toilet lid was full and it was still pouring in
2 answers2024-04-27

The buoy controls the switch of the pumping cover, and the switch is generally worn out after a long time, so it is not so sensitive. You can open the lid and press it manually, or lift it on it. >>>More

What should I do if the toilet is full of water?
5 answers2024-04-27

Buy a leather tiger to unclog the toilet for a few yuan (see the picture above), put it in the toilet and press it a few times.

The toilet is blocked, the water in the toilet tank is full, and there is water when the flush butto
1 answers2024-04-27

The water supply control valve inside the toilet tank fails; >>>More

When the toilet tank in my house is full, the water always flows into the toilet bowl through that w
3 answers2024-04-27

There is a float in the toilet, and a float controlled inlet valve, under normal circumstances, when the water is full, the float rises, and the control valve closes. Judging from your description, either the float is stuck and can't rise; Either the water valve is broken and won't close, or there is a problem with both. Check it yourself, maybe it's just stuck, and if the accessory is broken, you can also buy it.

Why can't I flush the toilet when the water is full?
1 answers2024-04-27

The toilet is full of water and can't be flushed. Should be. >>>More