-
Anonymous users2024-01-23Possible Causes:
1. The LED drive power supply is bad;
2. The line is not passable, it may be that a joint falls off or the switch line falls off.
There is a high probability that the LED driver will be damaged.
-
Anonymous users2024-01-22Open the circuit and check the neutral and phase lines of the LED light circuit.
You first determine whether there is a problem with the switch, and if the switch is good, which is. LED light, which piece is faulty, or the controller inside is damaged, I hope my answer will be helpful to you.
It means that you will encounter a lot of troubles in the near future that you need to overcome, and good luck with you.
>3£¬ÈledµÆµ
>4£¬½220V¼Ìµ >>>More
The remote control is generally segmented, if you can control other gears, it is the problem of not lighting the light source of this gear; If you can't control the light source of the entire lamp, it's a problem with the remote control itself. It's good to debug what kind of problem it is.
Problems in the design of the power supply may cause this phenomenon, and the slight brightness consumes almost no power, and the chance of affecting the life of the light strip is not large. However, this may indicate that there is something wrong with the switch or wiring, or that there is a small light on the switch. For example, the use of dual control switches, the ground wire leakage current is large. >>>More