-
Anonymous users2024-01-23A modern kitchen is usually equipped with a stove (gas stove, electric stove, microwave oven or oven), a countertop (sink or dishwasher) and food storage equipment (e.g. refrigerator).
My house also fell off, mainly because the hot and cold bends in the flue were uneven, so that when the hidden cement solidified, it was not heated evenly. >>>More
It is enough to use CF-2000 high-efficiency composite waterproofing agent for waterproof plugging and reinforcing treatment, and the plugging effect will be better when combined with chemical grouting. But at some additional cost. As for the situation of your home you said, it is best to let professional and technical personnel go to the scene to see, there is really no, you can take some photos of your scene and send it to know, let us see, help you analyze it specifically, so that we can give you the correct guidance and consultation.
Such a modification is not recommended.
If it is a residential building, it is not possible to transform the kitchen into a bedroom, which is in violation of the requirements of the national building decoration regulations, and there will be major safety hazards in such a transformation. Because there will be gas pipes in the kitchen, changing the location of the kitchen involves remodeling the gas lines, gas lines and fittings appear in the bedroom, and if a gas leak occurs, there will be a major safety hazard. >>>More
The air humidity is too high. The relative temperature on the tiles is low.
There are many reasons for cracking at the corners of the ceiling, and it is also a technical problem that is not too high! The main reasons are: 1. The stability of the plate is not good, also known as the shrinkage coefficient is too large; 2. THERE IS NO EXPANSION JOINT OR THE EXPANSION JOINT IS TOO SMALL, AND THE COMMON SEAM IS RESERVED FOR 3 5MM AS THE REFERENCE VALUE; 3. Without the elastic treatment of the seam, it is generally necessary to fill the elastic putty and seal it with kraft paper tape twice, and then do the general batch ash treatment on the surface; 4. The room is not ventilated or the temperature difference is too large, and the humidity is too large, and cracks will appear like rapid drying!