Please ask if the total air opening has a leakage warranty, the bathroom branch road is not installe

Updated on Bathroom 2024-04-12
3 answers
  1. Anonymous users2024-01-23

    Under the condition that the total power leakage protection switch is in normal working condition, when there is leakage in the bathroom, the total leakage protection switch can be disconnected normally to play its due protective role.

    However, judging from the content described, since each classified area uses an air opening with leakage protection, there is no reason to install and use a switch without leakage protection function for the bathroom alone, because the bathroom may have appliances such as electric water heaters, and the leakage protection requirements are higher.

    It is recommended to consider replacing this empty opening on the bathroom circuit with leakage protection.

  2. Anonymous users2024-01-22

    As long as the leakage current is the same, the leakage protection effect of the main switch and the leakage protection of the shunt belt are the same. The use of leakage insurance for each branch is actually an additional protection in case of any failure. If you are not sure, you can replace a switch with a leak protection.

  3. Anonymous users2024-01-21

    Generally, the total air opening does not need to be leaked.

    The empty opening of wet places such as kitchens and bathrooms should be leaked to ensure that the air is opened to prevent electric shock accidents.

Related questions
Please ask about the leak in the bathroom of the house
1 answers2024-04-12

This kind of upstairs and downstairs is a neighboring relationship, you can ask the upstairs to be repaired, or find the property to coordinate, if the other party does not solve it, you can sue the court.

The empty opening of the bathroom is 40a, and the total opening is appropriate
2 answers2024-04-12

The incoming wire depends on the meter; The air opening is not as large as possible, and it should be selected according to the actual circuit load;

Can I use the 1P N leakage protection bathroom? Is it safe?
1 answers2024-04-12

It is best to use 2P leakage protection in the bathroom, and 1P N is unsafe.

There is only one total empty in the house, and now the lights and sockets in the bathroom are out o
5 answers2024-04-12

Caused by oxidation of the line. Check the two places of the bathroom light connector and the bathroom socket connector, because your home lighting socket shares a power supply, so just check these two places, don't forget to turn off the power, if you don't, find an electrician.

A year after moving in to a new house, the empty opening of the bathroom circuit is always jumping
4 answers2024-04-12

As long as there is a trip and the load is within the range, there is a leakage phenomenon, and it is recommended to ask an electrician to measure it on the spot.