-
Generally, there is a decorative cover that comes with the faucet at the entrance and exit, which can cover the area around the nozzle. If your faucet doesn't have this decorative cover. You can measure the thickness of the pipe, as well as the size of the perimeter that needs to be covered.
If you go to a hardware store, it's usually only 1 yuan.
-
When installing angle valves, some angle valves have ugly cover plates.
-
Try it with white ash and maybe it will work, just add glue and water to white ash.
What kind of connection method is the place where you are connected to the water heater for water seepage, if it is a hose, check whether the position of the leather cushion is appropriate, and the degree of tightness should be moderate.
The water heater inlet pipe is connected to the water pipe through a valve and a tee. >>>More
Hello, due to long-term repeated heating and cooling, the water heater has accumulated and agglomerated the dirt inside, so it has a turbidity every time it is used. >>>More
Gas or electric water heaters can be used to access the kitchen and bathroom.
This should be the water heater inlet and outlet pipes in the filter screen is blocked, close the water inlet valve, open the valve to the water heater connection pipe (including the pressure reducing safety valve), find the filter screen to clean it, and then install it back in place, you can not operate it, you can find the property department or other maintenance personnel to operate.