What should I do if the pulley on the bathroom sliding door is broken?

First of all, buy bai pulley accessories, building materials hardware stores sell du. If you sell hardware, you can find someone to change it for you, but you need to add labor costs. Hanging inside.

There are two double wheels and single wheels for rail doors. If it is a single wheel, grasp both sides of the door with both hands and approach the other door, the wheel will go off the rails, and then you can take out the door.

Note: There is also a "mountain" type card slot under the door, which is fixed with gong wire, and it is easy to take out this door. When taking the door, the two corners must be protected with cardboard boxes, otherwise the door will be damaged.

The steps are as follows: 1. Take a frame and lower seal, and fix it with fixing screws.

2. Place the fixed frame on the ground, and then arrange the sliding door panel on the frame.

3. Take another frame and snap it into the arranged sliding door panel, and fix the lower seal and frame with screws.

4. Snap into the upper seal, fix it with screws, and fix the upper pulley at the same time.

5. After the upper and lower screws are fixed, use the traction screws to fix the slide wheel in the lower seal to complete the installation.

Note: When installing the slide wheel, the pulley shrapnel is inward.

This is the perfect way to install the glass door in the bathroom.

Whether the sliding door can be easily opened and slided smoothly depends mainly on its hardware: the upper and lower rails and the upper and lower carriage wheels, as long as the door panel is pulled when *, it will feel whether it is smooth and whether there is no noise. Every time the pulley is opened, it slides in the upper and lower rails, so the upper and lower rails require high strength and no deformation.

The smooth sliding mainly depends on its hardware: the upper and lower rails and the upper and lower pulleys, as long as you pull the door panel, you will feel whether it is smooth and whether there is no noise. Every time the pulley is opened, it slides in the upper and lower rails, so the upper and lower rails require high strength and no deformation.

The wheels of low-gear sliding doors are usually steel, so the hardware is also an important reason to determine the price of sliding doors.

It means that your education is a junior college, a college diploma, and a college diploma, and many jobs in this employment area require a college degree or above, such as sales, design, marketing, and the like.

What should I do if the pulley on the bathroom sliding door is broken?

The pulley is broken, and the pulley can be replaced.

The pulleys on the door can be replaced.

Remove it and replace it with a pro.

Dismantle the sliding door sliding door 1First, one hand is perpendicular to the ground to lift one end of the sliding door, and one hand sweeps the lower part of the sliding door pulley to hold up the pulley. 2.

Then lift the sliding door from the track to one end and put it down. 3.In the same way, the other end of the sliding door is lowered from the track in the same way as the previous two steps.

4.Then hold the ends of the door with both hands and lift it up. Second, remove the pulley 1 from the bathroom sliding door, and the student with less strength will lay the sliding door flat on the floor of the plank.

If you have a lot of strength, you don't need to put it down, and you can directly disassemble the sliding door perpendicular to the ground, and you can omit cardboard.