How to choose an energy saving toilet, is it better to flush or siphon?

Toilet: When buying a toilet, in addition to the shape of the product itself, the first thing to pay attention to is the wall distance of the toilet (the wall distance of the toilet refers to the distance between the center of the pipe drain and the back wall). The standard wall spacing is generally divided into two types: 305mm and 400mm.

In addition, when choosing a toilet, you should also pay attention to the flushing method and water consumption. There are two common flushing methods for toilet flushing: direct flushing and siphoning. Generally speaking, flushing toilets are noisy and odorless.

The siphon toilet is a silent toilet, with a high water seal and is not easy to smell back. In terms of toilet water consumption, the state stipulates that 6 liters of split toilet and 9 liters of connected toilet are water-saving toilets, and some manufacturers with strong technical development capabilities, such as Jishiduo, etc., vigorously develop 3 6 liters of toilet flushing separately, in the case of ensuring the flushing effect, it saves 67% of water compared with the general toilet, and it is a better choice to consider from the aspect of environmental protection and saving costs.

First, the flushing method.

Nowadays, most toilets on the market are siphoned, which is easy to flush off the swag that adheres to the surface of the toilet. The disadvantage is that it is water-consuming and easy to block. It is not easy to clog directly and is easy to smell when it is disadvantaged.

Second, the effect of sewage discharge.

Flush check: Flush 3 times, at least 5 water-filled ping pong balls can be flushed. Also check the blowdown effect. Put in a piece of paper and drop a drop of ink, it should be drained at once without leaving a trace.

3. Touch the surface.

Gently touch the surface of the toilet bowl with your hands, if there is no uneven feeling, and the glaze and embryo feel are very delicate, the surface of the toilet bowl, its surface quality is better. If it is a low-to-medium grade toilet, the glaze and embryonic body on its surface will be rough, the color will be dull, and there will be small holes under the illumination of the light. Dig your hand deep into the stain, the inside should be smooth, rough and unglazed, and easy to leak.

Fourth, determine the pit distance.

Find out how the toilet drains its water horizontally into the wall or under the floor. Horizontal drain toilets must be clearly distanced (the distance between the center line of the toilet rear drain and the ground). The lower drain toilet must be clear about the pit distance.

Pit spacing refers to the distance between the center of the drain pipe of the toilet bowl and the wall. Generally, there are 300mm, 350mm, 400mm, 450mm, etc. Be sure to measure the pit distance first, and then choose the toilet with the pit spacing.

I think it would be cleaner if it was flushed! But it's louder, think for yourself! Hey!

When choosing a toilet, it is recommended to use a siphon, flushed very clean, as for the water will splash on the buttocks, it is because of the design of those toilets, the previous Henan ceramics are like that, now the toilet sink is designed to be relatively backward, there should be no splashing problem, and, the button can not be bounced up and the toilet has nothing to do with it, that is the water tank sanitary ware is not good, the general toilet manufacturers are not equipped with water tank sanitary ware, are the seller's own deployment. When buying, it is no problem to choose the water tank sanitary ware made in Guangzhou. If conditions permit, buy some brand toilets, Jiufu's, or Wrigley.

Hope it helps.

Flush toilets are characterized by a short flush pipe path and a thick pipe diameter, which makes it easy to flush out filth by using the gravitational acceleration of water. In terms of scouring, the diameter of the sewer pipe is large, and the larger filth is easy to flush down; The siphon pipe is high, long and thin, because the smaller the pipe diameter, the more obvious the siphon effect and the greater the pumping force. In this way, the requirements for water volume are high.

In terms of flushing, it is easier to flush off dirt attached to the surface of the toilet. They have their own pros and cons, so you should also combine the actual situation when purchasing.

When you choose a toilet, pay more attention to the following points: 1. Whether the toilet adopts the double-layer glazing technology of "high smooth bottom glaze + self-cleaning glaze", the ceramic glaze is smooth and delicate, not easy to wear, easy to clean, and also pay attention to whether the thickness of the porcelain glaze is uniform and whether the color of the porcelain glaze is consistent. 2. In terms of flushing method, the toilets on the market can be divided into two types:

Siphon and open punch down (i.e. straight flush). The siphon type is divided into ordinary siphon type and jet siphon type, jet siphon flushing method, the base water storage belt jet hole, water is sprayed out from the jet hole when flushing, and the form of accelerated siphon is accelerated, and the flush is cleaner and less noisy. 3. The water tank accessories are like the heart of the toilet, when purchasing, we should pay attention to the selection of accessories with good quality, low water injection noise, strong durability and good air tightness, water parts that can withstand long-term soaking without corrosion and scale, and the flush button is 3 6 liters of double-gear water-saving type, which can save water.

4. The national standard is that the water seal is 50mm, and the water seal of this toilet can be adjusted to 80mm 100mm, the purpose of which is to better prevent odor and prevent environmental pollution, of course, this toilet can also be adjusted to the national standard of 50mm. Hope you help.