-
Anonymous users2024-01-23Unobstructed. According to the regulations on the management of decoration, it is forbidden to change the waterproof structure of the original bathroom without authorization, and similar construction can only be carried out after obtaining the written permission of the original house design unit.
First of all, from the perspective of professional interior design, the rooms in the hotel are relatively small, and the bathroom space is even smaller, and the transparency of the glass can expand the sense of space and will not bring a sense of depression to the guests. >>>More
It's pretty much the same as the answer upstairs. If the top of the bathroom is the upper floor of the ground ring beam. Generally, the beam specification is 300X200 240 360 480 or 500X240 360 480 540.
Fine decoration usually the waterproof of the dry area of the bathroom is 300 high, and the wet area and the public wall part of the bedroom or study are 1800 high. Waterproof to the root of the wall foot pipe root first, and then do a large surface, first difficult and then easy, waterproof paint twice to vertical brush, a waterproof completion, water storage 24 hours without leakage, and then do mortar protective layer, and then tiling.
It is necessary to set up the tie bar with full length through, and the design in the drawing is to enlarge the safety factor, and the construction is better according to the drawing.
Is the cement pressure plate of the sanitary partition wall used for re-inspection? I think it should be good.