The tiles on the bathroom wall are like this, how to glue them again, what glue to use, stick

Updated on Bathroom 2024-04-27
4 answers
  1. Anonymous users2024-01-23

    There is no reason to leave expansion joints, if the brick is not deformed, try it with marble glue.

  2. Anonymous users2024-01-22

    This is the situation that the tile is hollow and loose, if the area is relatively small, then directly use tile adhesive and repair it locally according to the following method:

    1.First, clean the cement where the tiles fall off to expose the cement base.

    2.Pour the porcelain sticker powder into water and stir it into a paste (the mixing ratio is: 20kg powder and 6kg water), and after stirring, it needs to stand still for about 10 minutes, and then stir slightly before use, which helps to increase the adhesion force.

    3.Use porcelain tile adhesive to repair and level the peeling cement base first, and then evenly apply the tile adhesive to the back of the tile.

    4.Knead the tiles to the point where they originally fell off.

    5.Finally, gently tap the tile with a rubber hammer so that it is the same height as the other tiles.

    However, if the area of the hollow drum is relatively large, it is recommended to use tile adhesive to re-pave.

  3. Anonymous users2024-01-21

    With stone glue, specially glued tiles. There is a hardware store or a building materials store.

  4. Anonymous users2024-01-20

    Go to the hardware store and buy a tube of transparent glass glue and get it in minutes.

Related questions
The tiles of the washstand at home are like this, and they can't be removed, as if they have penetra
3 answers2024-04-27

Personally, I recommend buying a glass glue, applying some to the seams, and it will be fine when it is dry.

There are no wires left in the bathroom, and the tiles on the walls have been pasted, can you arrang
1 answers2024-04-27

The bathroom will generally have a suspended ceiling, and you can use the trunking to walk the top and line it.

Water seeps through the tiles on the bathroom wall
2 answers2024-04-27

Such a leak may have leaked from the upstairs floor bath, now that the weather has gradually warmed upstairs, and the upstairs is about to start bathing again, you have to go upstairs and urge them to check carefully and fix the leak.

Decorate the bathroom, the wall of the bathroom is tiled, so you don't need to make a waterproof lay
3 answers2024-04-27

If you don't do waterproof tiling, you may seep water, and it doesn't look good if you do waterproof tiling.

What should I do if the bathroom leaks, have I pasted the tiles, is it easy to deal with? How
13 answers2024-04-27

The first is to renovate the treatment, planing the original tile to the original base layer, repairing the waterproof slurry with waterproof slurry to re-do the waterproof layer, and paving the tile after passing the closed water test. The advantage is that the leakage can be effectively solved, but the disadvantage is that it is expensive and time-consuming. >>>More