-
Anonymous users2024-01-23The ground wire heated by solar electricity is generally not directly connected to the lightning protection belt on the roof, if the resistance requirements are too high as you do, generally will not use this method, you say that if you need to bury the lightning wire separately, here you are wrong should be the grounding pile, 4 * 4 angle steel (not painted) long to the ground to hit the above at the upper end of the weld a 12mm screw, the grounding wire is connected to the screw with two nuts and die on the grounding pile of the grounding wire guide socket.
-
Anonymous users2024-01-22The bottom line of electric heating can be connected to the leakage protection plug, if there is a lightning strike on the lightning protection belt, it will cause solar energy to be charged or damaged electric heating, the bracket is connected to the lightning protection belt is the same reason, it is recommended to install it according to the manufacturer's requirements, do not install it yourself, if it causes an accident, it will be very serious.
-
Anonymous users2024-01-21Connected to the ground wire in the bathroom room.
Cloth a separate hot water line, or switch with a three-way valve. >>>More
Install a special water faucet for washing machines before the water inlet valve of the solar energy, and it does not affect.
The solar energy is on its own, and the solar repairer says that it is caused by a leak in the faucet in the bathroom, which makes the water in the tank come out? >>>More
The heating switch is used only when the water temperature cannot reach the bath water temperature, and it is generally used in winter, and it is not used in summer.
The roof solar energy needs power (water), and the heater also needs a power socket (boiling water), and there will be no danger when installed in the shower room, if the socket will spray water, please use a splash-proof and waterproof socket.