What should I do if there are too many stones in the toilet drain and are about to be blocked The lo

Updated on Toilet 2024-04-30
7 answers
  1. Anonymous users2024-01-23

    The main ingredient of toilet drain stones is urine alkali, which can be removed with common materials in the kitchen.

    1. Add some warm water to the toilet bowl and pour in some white vinegar.

    >2. Pour a portion of edible salt into the toilet.

    >3. Pour a portion of baking soda into the toilet.

    >4. Gently stir well and soak for 15 minutes.

    >5. Use a toilet cleaning manuscript ruler brush to brush the parts with stones, and the key height can remove the stones.

  2. Anonymous users2024-01-22

    Buy a bottle of hydrochloric acid and pour it back into the toilet, pay attention to the time of pouring it in not too fast, it will splash very much, slowly add it to the water, pay attention to protect yourself. Wait for a period of time to poke it with a wooden stick to see, and you can just flush it off with water. Please adopt it if it is helpful.

  3. Anonymous users2024-01-21

    You can make your own, find a stick of about the same length, wrap a cloth around one end, wrap the cloth into a ball or column, the diameter is slightly larger than the diameter of the toilet drain, and then put a plastic bag, and then poke it down.

  4. Anonymous users2024-01-20

    Put the toilet full of water, take a mop to block the toilet mouth, keep lifting it up and then poke it down, the amplitude is not too large, but the action should be strong and fast.

  5. Anonymous users2024-01-19

    Buy two bottles of toilet soap and pour it in, don't flush it, let it flow on its own, if this hasn't been dealt with yet, go buy some dilute hydrochloric acid (strong corrosive, be careful) and pour it in, don't flush it, this can be done.

  6. Anonymous users2024-01-18

    Scrubbing tools (toilet brushes) to scrub the urine scale, multiple cleanings are generally incomplete, and the next cleaning is required.

  7. Anonymous users2024-01-17

    Scrape it off with a knife and it's clean.

Related questions
10 answers2024-04-30

As for the drain of the toilet, use a 100 or 10 mm diameter PVC pipe to connect to the toilet, and then go straight to the septic tank. And then this interface is made with glass glue.

2 answers2024-04-30

The contact between the toilet drain and the pipe should be connected with a flange.

4 answers2024-04-30

What should I do if the toilet flange is put into the drain and the drain pipe is cut flat >>>More

1 answers2024-04-30

If it is connected in series with the indoor toilet drain, it needs to be blocked - for fear of returning odors, other situations are arbitrary!

6 answers2024-04-30

Looking at the size of the toilet, it is generally 30 to 40 cm above the ground.