The main valve in the bathroom is closed, and the wash basin is still running water

Updated on Bathroom 2024-04-30
5 answers
  1. Anonymous users2024-01-23

    1. As long as the valve is not broken, the water stored in the pipe will not flow after it runs out.

    2. Press the toilet and the water in the pipe will flow into the toilet.

    3. Turn on the sink faucet, if it is not a lot of pressure to get out of the water, the valve is good, and it can be finished after a while, if there is a lot of pressure to get out of the water, it means that the valve is broken, and immediately find someone to repair it.

  2. Anonymous users2024-01-22

    There are only three reasons, 1. There is a problem with the main valve and the closure is not tight. 2. The water in the wash basin didn't come from there. 3. It is the accumulated backwater, just put it down.

  3. Anonymous users2024-01-21

    The main valve of the bathroom is closed, and the faucet of the wash basin is opened, and the main valve of the bathroom is replaced; The main valve of the bathroom is closed, and the faucet of the wash basin is also turned off, but the faucet still has running water, replace the main valve of the bathroom and the faucet of the wash basin.

  4. Anonymous users2024-01-20

    There are two reasons why the main valve in the bathroom is closed, and the wash basin is still running water

    The main switch of the valve is broken.

    When you close the main valve, there is still water in the water pipe, it is recommended that you wait for a while to see if the main valve is broken or the water in the water pipe is the cause.

  5. Anonymous users2024-01-19

    At present, the domestic valves are generally not well sealed, especially some ordinary globe valves and inferior ball valves. There is no other way to do this than to replace the main valve.

Related questions
The size of the washbasin in the bathroom, how to choose the washbasin, and the washbasin is drained
1 answers2024-04-30

1. Bathroom wash basin size.

Bathroom basin size. >>>More

The bathroom basin faucet fell off and the valve won't close
2 answers2024-04-30

Turn off the main switch.

It's okay to change it. >>>More

Bathroom wash basin, countertop basin or undercounter basin
10 answers2024-04-30

Let's talk about the undercounter basin again and look at the characteristics of the undercounter basin. The characteristics of the undercounter basin is that it is very easy to take care of, as long as the water on the countertop is gently wiped, it will be touched into the basin, and the water will not drip onto the ground during the washing process, and the overall look is integrated with the countertop, not only beautiful, simple and generous, the installation of the undercounter basin is more troublesome than the installation of the countertop basin, the undercounter basin is not as good as the countertop basin load-bearing, and it cannot be pressed into the general situation, so don't worry too much about the load-bearing problem. >>>More

Bathroom basin size
10 answers2024-04-30

<> The minimum installation size and width of the toilet wash basin should be about 550mm. Many homes have small sizes, and in order to save space, the width of the sink will be reduced, but even if the width is reduced, it cannot be smaller than 300mm. In addition, a space of 1100mm should be reserved on both sides of the wash basin, i.e. 550mm. >>>More

Bathroom basin height
2 answers2024-04-30

Regarding how high the washbasin in the bathroom should be from the ground, I personally think that when making a washbasin, in order to prevent the washbasin from splashing on the wall next to it when it is in use. Therefore, it is necessary to do a good job of waterproofing the wall before installing a washbasin. Generally, the distance between the bathroom and the ground should be 80 or 85 cm.