-
Anonymous users2024-01-23The toilet installation should be glass glued, cut the glass glue of the toilet base with a blade or the like, the toilet will be removed, the water inlet hose will also be unscrewed, and then the toilet bowl will be turned on its side, so that the blockage can be easily handled. Then reduce and glue well with glass. The glass glue takes 24 hours to dry before it can be used with water.
-
Anonymous users2024-01-22Use three wires to help together, and then use pliers to make three small hooks at the top, that is, about 5 mm, and then rotate and insert them into the toilet, constantly rotate and drag the belt, hook out if you can hook out, and break if you can't hook out, and then flush down, the length of the wire must exceed meters. Millimeter thick wire.
The toilet has two outlets, one at the front and the other. Generally usable.
A very good question: Is there a difference between the comfort of the 520 sofa with the lowest configuration and the high configuration? >>>More
A few suggestions:
1 I don't think it's very obvious that the style you are talking about is different. >>>More
Kitchen door, I also give you a suggestion, make a glass sliding door, look good, and practical, belong to the open kitchen, there is no fume, the kitchen is generally connected to the living room, make a glass sliding door, it will be very bright, and the space will be very large.
This is a construction problem, if the deviation value exceeds the requirements of the national standard, it is a construction quality problem, and the construction party can be ordered to rectify. According to the national standard "Code for Acceptance of Construction Quality of Building Ground Engineering GB50209-2010", the width deviation of the plate gap between the tiles should be less than 2mm. >>>More