-
Anonymous users2024-01-23The water supply pipe is not fixed, if you want the water supply pipe to stay in the original position, you can find a way to fix it.
As long as it can be hydrated, it doesn't matter if it doesn't leak, and it doesn't affect the use.
-
Anonymous users2024-01-22If you don't want it to move, fix it. But it doesn't matter if you move, the key is that it doesn't leak.
Some toilet bases have two small holes for fixing screws, which are not closed during installation, and the ground flange is not installed, and the flush will overflow if the nozzle is not aligned.
<> toilet leaks as soon as the flush base is flushed: 1. The toilet installation problem occurs when the toilet is flushed, and the toilet leaks when it is flushed, which is that the toilet is not sealed at the beginning of the installation of the toilet, and some netizens buy the toilet from the Internet and install it themselves, and the flange and the toilet drain are not aligned well when installing the toilet, and it will naturally leak out of the toilet base when flushing. >>>More
1. Flush switch problem.
You can check whether the flush switch is restored to its original state, because the flush switch in some toilets is easy to wear out after being used for a long time, or it is stuck, so it cannot be restored. Typically, the switch can be reset by repeating it a few times. >>>More
Sewers, through which everything in the toilet goes into the city sewers.
What you touch in your hand is the float rod, but after a long time, you should change to a water inlet control valve, and if the drain valve is easy to use, you can continue to use it.