-
Anonymous users2024-01-23It is best to choose wall and floor tiling for kitchen and bathroom tiling.
In the general kitchen and bathroom decoration, among these two ways of paving tiles, Xiaomei recommends choosing the wall to press the floor. Why did you choose this?
1. Because when the water splashes on the wall, it will flow down the wall to the root of the wall, and then drain down the floor drain; In the case of ground pressure walls, water flows directly from the wall to the root of the wall, which will seep into the waterproof layer in the long run, thus affecting the use of ceramic tiles.
2. The wall pressing will not affect the wall tiles during construction, and the construction period will not be delayed.
Therefore, through the above two points, the kitchen and bathroom bricks must be paved with the wall and the ground. Here I would like to remind you of one point: to reserve a certain height difference, generally the height of the entrance and the lowest floor drain, the height of the general door and the floor drain is best in 2 3 cm, so that the water on the surface can flow into the floor drain, so as to discharge.
Chuangqi starting point decoration.
-
Anonymous users2024-01-22Of course, it is the ground pressing wall, and the last to pave the ground, if the ground is paved first, it will take a long time to go up and lay the wall, and the ground will be dirty or damaged. Moreover, laying the ground first will cause great difficulty in horizontal paving for wall laying.
-
Anonymous users2024-01-21It is the wall pressed to the ground, this is the standard process, the wall tiles are pasted first, but instead of starting from the bottom to the top, the bottom row is vacated, and the second row is pasted, and the ground is pasted after the paste. Finally, fill in the vacancy in the bottom row of wall tiles. The end result is the effect of the wall pressing the ground.
After doing this, the gap is small, beautiful, and the waterproof effect of the wall is better than that of the ground pressure wall.
First, the force of the bathroom wall after pasting >>>More
Normally, it should be wall tiles pressed floor tiles – this can reduce a critical gap that leaks underneath; However, the general practice of workers is the opposite, with only one purpose: to build quickly and reduce construction costs.
Hello, the general bathroom bricks are wall tiles pressed floor tiles. >>>More
Advantages of ground pressure walls:
Generally speaking, the ground pressure wall is the wall tiles from the bottom to the top, so that the tiles are not easy to produce hollowing, and the overall appearance will be more beautiful. >>>More
Sticking wall tiles, it will not change color and has a moisture-proof function.