What is the way to repair the sand in the toilet at home?

If you want to solve it completely, you can dig out a groove in the concrete around the gap around the squatting toilet, and then re-apply a layer of cement mortar, and after the solidification is good, it will be solved, you can also use marble glue, but the corroded concrete surface must be cleaned up, and then marble glue must be applied. FYI.

The squatting toilet and the tile are so big, the mason master's craftsmanship is a bit of a problem, the easiest remedy is to get some cement paste.

This kind of squatting pit because the tile is not completely left in the seam is relatively large, you can buy a little sewing agent, and then dig the pit with a utility knife to dig the cement down, not too deep, dig a little bit, and then hit the sewing agent, scrape flat with a scraper plane, do not touch the water for 24 hours, and wait for the sewing agent to dry the tile and squatting toilet on the excess sewing agent shoveled off, so that the whole seam is repaired, the color is good-looking, and there will be no water seepage into it, waterproof and mildew proof is not afraid of dirty, there are dirty things washed with a brush to clean and brush off, Easy to do hygiene will not breed bacteria, now the house is pasted with tiles will generally do beautiful seams, very useful, you can search on Alibaba for Baoshijie, the quality of this brand of beauty sewing agent is very good, water-based sewing agent is green and environmentally friendly, the construction is also convenient, you can try it!

Old-fashioned cast iron sewer pipes have a crack repair method:

1. Now there are many adhesives that can deal with water seepage, the key is to clean and dry the surface of the place to be treated before gluing.

2. In the case that there is no water in the water pipe, polish the cracks and leakage water, apply epoxy resin to the cracked places, and then wrap a layer with white gauze or glass ribbon, and then apply a layer of epoxy resin, which can be repaired.

3. Use marble glue (special glue for marble stone) to bond and repair.

4. Cast iron welding rod is used for welding repair.

5. The problem can be solved with the leak-proof king, and it is best to rivet it with aluminum rivets, such as small sand holes, and aluminum wire rivets can be used. There is one of the easiest ways to do this: smear a glass of water (which is available at building materials stores) on the sand holes, and sprinkle it with dry cement; Smear another layer of glass water and sprinkle another layer of dry cement.