-
Anonymous users2024-01-23Two ways.
One is closed with glass glue, which can be separated with a utility knife, and the other is fixed with fixing bolts, which uses a wrench to remove the nut first and then move, no matter what it is, it is necessary to close the water first, and then release the water.
-
Anonymous users2024-01-22If it is a toilet bowl that was previously fixed with iron expansion screws, first remove the nut of the expansion screw, "After a long time, you can first apply some oil-lubricated screws", and then move the toilet vertically upwards to remove the toilet.
If it is a toilet that is currently fixed with glass glue, you can use a wallpaper knife to cut the glass glue connecting the toilet bowl to the ground to remove the toilet.
Be sure to replace the toilet drain sealing flange when installing a new toilet, otherwise it will leak.
-
Anonymous users2024-01-21Nowadays, toilets are generally made of glass glue or cement! If it's glass glue, then it's easy to scrape it with a knife! If it's cement, then it's troublesome, so you have to take something like a hard point and knock it slowly, and if you don't smash it well, you will smash the toilet!!
The glass glue will change color after a long time, if you stack it, after a long time, it will seep out due to the water absorption of cement!
-
Anonymous users2024-01-20If the utility knife is not easy to use, you can use a sharp awl to get some points!
You can pour 84 disinfectant and then rub.
Remove the anti-fog cover first and replace the bulb directly. Some are conjoined bulbs that need to be removed before being replaced.
The panel of the lamp is also a gusset, insert it into the gap between the board and the board with a wallpaper knife, pry it lightly, it will pry out the panel a little, and then continue to pry, pay attention to the tentative, do it carefully, so as not to scratch the paint on the surface with the knife. Break it off with your hands. >>>More
Make sure that the main gate is closed first, and then use two wrenches, which can generally be removed.
This is a bit difficult to dismantle, it's best to dismantle the glass and then dismantle it, it's all very tight, [car questions, ask the car master. Professional technician in 4S shop, 10 minutes to solve. 】