-
Anonymous users2024-01-23The panel of the lamp is also a gusset, insert it into the gap between the board and the board with a wallpaper knife, pry it lightly, it will pry out the panel a little, and then continue to pry, pay attention to the tentative, do it carefully, so as not to scratch the paint on the surface with the knife. Break it off with your hands.
In fact, the best way is to use a suction cup, (that is, a suction cup attached to the glass or a tile), suck it on the gusset next to the lamp, and then remove the panel of the lamp. I'm a bit verbose, in fact, you just need to know what the structure of the lamp with integrated ceiling light is, the lamp disc is resting on the keel, and then the spring is stuck. You can remove it as long as you go up, and the lampshade is actually a gusset, which can be removed directly down without damaging the panel.
-
Anonymous users2024-01-22You try two methods:
1. If it is close to the ceiling, there are three hooks inside (evenly distributed), hold the lampshade from the bottom, rotate the edge of the lampshade clockwise or counterclockwise, and rotate it about 30 degrees. The optional process must be supported, otherwise it is easy to get off the hand and break.
2. If there is a certain distance from the ceiling, there should be two handles (in a line, 180 degrees), hold the lampshade, pull the handle outward, and the lampshade will naturally be released.
Give it a try! Be careful not to drop the lamp! Stay safe.
-
Anonymous users2024-01-21You try two methods:
1. If it is close to the ceiling, there are three hooks inside (evenly distributed), hold the lampshade from the bottom of Bi Chuan Potato, rotate the edge of the lampshade clockwise or counterclockwise, and rotate it about 30 degrees. The optional process must be supported, otherwise it is easy to get off the hand and break.
2. If there is a certain distance from the Zenzhi ceiling, there should be two handles (in a line, 180 degrees), hold the lampshade, pull the handle outward, and the lampshade will naturally be released.
Give it a try! Be careful not to drop the lamp! Pay attention to safe hands.
Disconnect the power supply, test whether it is completely disconnected with a test pen, disassemble the lampshade, start from the 4 corners of the rectangular living room ceiling lamp, use the suction cup hook of the suction glass disc, and at the same time suck the aluminum alloy part on the four corners, and slowly pull down synchronously; >>>More
Remove the anti-fog cover first and replace the bulb directly. Some are conjoined bulbs that need to be removed before being replaced.
There should be a bayonet next to the lamp, and there should be two springs in the position of the bayonet, you have to press the springs and slowly remove the lampshade first. Then dismantle the lights.
Healthy and bright is a good top, federal integrated ceiling LED lights, environmental protection, safety, energy saving, longevity, high color rendering, ultra-thin, efficient, dust-free. Little light, the university asked oh, hehe.
Installation Tools:
Percussion drills, toothless saws, rulers, drop wires, screwdrivers, booms, etc. >>>More