-
Anonymous users2024-01-23If your toilet is close to the wall, it is likely that the sewer pipe is too close to the wall, and the sealing ring is not covered or only half of it.
For general toilet installation, after finding a good position, the perimeter is sealed with silicone sealant. If it is completely cured, it will take about 24 hours. It is best to use it after twenty-four hours.
No, the worker told you not to use it because the current toilet is installed with glass glue to fix, and the general glass glue takes 6-24 hours to solidify, during which time the toilet may be displaced and leaked if you sit on it. There is no special reason, there will be no problem pressing the flush.
A family may be engaged in decoration once in a lifetime, before the decoration is generally rarely in contact with the bathroom market, when choosing a toilet, it is generally limited to looking at the brand first, and then choosing the style, and then asking the price. It didn't take long for the toilet to be used to go home, and there were problems such as water leakage and blockage. Leaking toilet is often a very annoying thing, how to solve this situation? >>>More
If it is a relatively humid weather, it is generally necessary to wait for the glass glue to dry thoroughly before it can be used, if it is a relatively dry and hot summer, like our south, it is now very dry and hot, and it can be used 24 hours. In wet weather, it usually takes more than 3 days. Therefore, it is wiser to install a toilet in the dry season.
There are two reasons, the first is that because the toilet has not been used for a long time, the water seal inside has evaporated, and you just need to pour some water into it. The second is that there are two rose-eyed eyes on the toilet base that are not blocked, and if you find some sludge and other things to block them, it will be tasteless.