The toilet is filled, what is the leak

A family may be engaged in decoration once in a lifetime, before the decoration is generally rarely in contact with the bathroom market, when choosing a toilet, it is generally limited to looking at the brand first, and then choosing the style, and then asking the price. It didn't take long for the toilet to be used to go home, and there were problems such as water leakage and blockage. Leaking toilet is often a very annoying thing, how to solve this situation?

What should I do if the bottom of the toilet is leaking? This series of questions may be confusing for friends who don't know, so follow along to find out!

What to do if the flush toilet is leaking.

The common cause of toilet leakage is that the hemispherical rubber cover that seals the drain is lighter, and the water leaks after the water tank is leaked due to insufficient gravity and not tight enough when it falls, and it often needs to be repeated repeatedly to close the lid tightly. The solution is to bundle a small amount of heavy objects on the connecting rod connecting the rubber cover, such as large nuts, toothpaste skins, etc., and pay attention to the bundle as close as possible to the rubber cover, so that the rubber cover is easier to cover the drain, and the water leakage problem will be dealt with.

Qualified households should change to water-saving sanitary appliances, advocate the use of water-saving water appliances or sanitary ware, use ceramic chip sealed faucets, eliminate spiral lifting iron faucets, transform toilet tanks of more than 9 liters, and use toilet water tanks of no more than 6 liters. For existing non-water-saving toilets, try placing a brick or a salt water bottle in the tank to reduce the amount of flushing water.

How to fix a leak at the bottom of the toilet.

The bottom of the toilet is leaking, which may be due to the fact that the connecting sealing flange between the toilet outlet and the ground drain is not in place. At this point, you need to disassemble the toilet, buy a new flange and install it from scratch, and then fix the toilet with glass glue. The glass glue only plays the role of fixing the toilet bowl on the ground without moving the position, and does not play the role of draining water when the toilet drains.

If the main sewer pipe is drained smoothly, the flange will not leak to the outside if it is slightly misaligned.

Why does the toilet leak 1. The toilet equipment is not installed properly, and the sewage outlet on the ground is not aligned with the toilet drain caliber. Then there will be water and a foul smell. 2. The toilet equipment is not professional, and there is no equipment flange.

3. Long-term use constitutes the loosening of the toilet bowl and the ground. 4. The quality of the toilet toilet is questionable, and the ceramic has cracks. 5. The internal parts of the water tank are aging.

It is mainly caused by the following reasons:

1. The toilet was not installed properly when it was installed, resulting in the misalignment of the sewage outlet on the ground with the toilet sewage caliber. As a result, water and odors will come out.

2. The toilet installation is not professional, and the flange is not installed.

3. Long-term use causes loosening of the toilet bowl and the ground.

4. Toilet toilet.

quality problems, ceramics have cracks.

5. The internal parts of the water tank are aging.

6. There is a problem with the water inlet group or outlet group of the toilet.

Solution: If the internal parts of the water tank are aging, you need to replace the parts as soon as possible, if the connection between the toilet and the sewer pipe is leaking, you need to reinstall the toilet and re-seal. If there is a problem with the water inlet group and the water outlet group of the toilet, you need to open the water tank and see that the water tank is overflowing, and the water flowing out of a water pipe indicates that the water inlet group is broken, and if there is a sound of water ingress, the water outlet group is broken.

If the water tank is leaking, you can take off the drain core and clean the scale.

After the above problems are eliminated, it is due to water seepage caused by improper installation:

1. If it is installed in a specialty store, it is usually padded with a sealing ring inside.

After putting the toilet bowl up, make glass glue around it.

Prepared tools: utility knife, (if you need to disassemble the angle valve.)

It is necessary to prepare) water adhesive tape, wrench, glass glue and glass glue gun. Toilet seals (need to be replaced if removed).

2. If it is a decoration of plumber and electrical tooling, it usually uses white cement.

Prepared tools: flathead screwdriver.

It is used to eliminate the original white cement), white cement (when reloading, first mix the water at the bottom of the toilet, and then put the toilet seat on it steadily, and then use the mixed white cement to seal the toilet footsteps in a circle, and it can be used when it is dry. Be careful not to let the white cement fall into the pipe, otherwise it will cause the pipe to be blocked. 】

If the above methods still can't solve the problem of water seepage, you can only find professional maintenance personnel.

First of all, it depends on whether the water is leaking or the water is leaking, a good difference, you can close the triangle valve of the water inlet first, and then release the water If it is still leaking, it is very likely that the flange ring is not installed well during installation, and the sewer outlet, flange, and pipe mouth are not together

If the cover of the drain cannot be reset, it is always stuck by the float valve. After the float valve is jammed, the lid is open. Shake the float valve card up and down, left and right.

Try to straighten it out. If the float valve card cannot move, change the accessories, and if there are no accessories to change, you have to change the toilet with a new one.

The toilet spout is not perfectly aligned with the floor drain, resulting in a water leak.

Ask the worker to disassemble it and make it anew.

If it's not a toilet quality problem, reinstall it.

Caused by installation errors or broken flanges.

The specific steps are as follows:

1. The bottom edge is leaking, which may be caused by installation errors or broken flange rings, it is recommended to remove the toilet, reinstall it, or replace the flange ring.

2. If it is caused by the poor sealing of the bottom of the toilet and the floor tiles, that is, the glass glue is opened, it is recommended to remove the old glass glue and re-enter the high-quality glass glue seal.

3. If the bottom of the toilet is cracked and leaking, the crack is not large, it can be filled with colloid, if the crack is large, it is recommended to replace the toilet.

4. Toilet leakage, in addition to the quality of the toilet itself, it is also possible that the quality of the water valve pipe is not good, and it is damaged, causing water leakage. In addition, if the drain valve is not tightly sealed, it will also cause the toilet to leak.