What is the reason for the pinholes caused by spraying PE primer on the solid wood board?

Updated on Solid wood 2024-03-05
2 answers
  1. Anonymous users2024-01-23

    This problem is caused by the unclear separation of the oil-water separator.

  2. Anonymous users2024-01-22

    thirds of the co

Related questions
Why is the red oak solid wood sprayed with white PE on the white background will delamination
2 answers2024-03-05

The red oak solid wood surface layer sprayed with PE coating can not be bonded, which is related to the fact that the solid wood surface layer is too smooth, and the incompatibility of the material is also related. The solid wood surface layer is too smooth, and the spray coating has no attachment point, so it will naturally delaminate and cannot be bonded. Solid wood and PE are two materials with different properties, and it is reasonable that they are incompatible and not bonded. >>>More

What is the matter with a solid wood sofa with holes in the bottom board?
21 answers2024-03-05

Some high-end solid wood furniture mostly use mortise and tenon structure, many people do not know much about the mortise and tenon structure, and introduce the relevant knowledge of the mortise and tenon structure. >>>More

Wooden furniture is good to paint and spray paint on it
3 answers2024-03-05

For your question, I have two views, one is brush or spray, for these two construction methods, the effect of spray paint is of course better, and it will be more labor-saving and worry-free, the painting technology is not good, it will leave a brush mark on the surface, and for the variety of paint you paint, if it is used for furniture painting, it is recommended that you still choose a water-based wood paint like Dig You, water-based paint due to good environmental protection effect, does not contain formaldehyde and other harmful substances, and in some places the effect is better than paint, as the effect of not yellowing, As a new type of paint variety, sooner or later it will replace paint. Hope mine can help you.

Is it better to venerate the solid wood door with a wooden board as the bottom or a gypsum as the ba
2 answers2024-03-05

It is recommended to use a wooden plank bottom.

1. PVC lamination. As you say, "a layer of cardboard on top", the skin of this type of door is easily damaged and cannot be repaired, so that the inner panel absorbs moisture and deforms. >>>More

Do pine solid wood boards need to be scraped with putty when spraying white paint
1 answers2024-03-05

There are no relevant instructions, it is recommended for you how the putty will fall off the wooden board with a good primer, for reference only. Of course, it will fall off, and the ash should be scraped before the primer is washed. Your primer is all done, and then you go to scrape the ash, and the program is changed, so it's strange if it doesn't fall off. >>>More