What is the matter with a solid wood sofa with holes in the bottom board?

Some high-end solid wood furniture mostly use mortise and tenon structure, many people do not know much about the mortise and tenon structure, and introduce the relevant knowledge of the mortise and tenon structure.

The tenon is the tenon and tenon, which is the protruding part of the wooden member. Mao is commonly known as mortise eye, mortise and tenon, and is a hole inserted into the tenon. The mortise and tenon structure of all-solid wood furniture is used to connect the various parts of the furniture, mostly used to connect panels, two faces or sides, two wooden strips and three wooden components.

The commonly used mortise and tenon structures are as follows:

1. Dovetail. The tenon is wide at the end, narrow at the root, and has a ladder-shaped shape, like a swallow's tail, and is used where two plates meet at right angles. Schematic diagram of mortise and tenon structure.

Second, the tenon. It is also called the horse's mouth tenon, through tenon, through tenon, through tenon, and tenon to be exposed.

3. Dark tenon. The double is called the stuffy tenon, and the tenon is not exposed.

Fourth, half tenon. Do not chisel through the hole, the tenon is not exposed, and the length is two-thirds of the tenon.

Fifth, the length of the tenon. The tenon is long and short perpendicular to each other, and is combined with the side wipe of the eye respectively, and is mostly used for the joint of the leg and the panel of the side wipe.

Sixth, set tenon. It is mostly used at the junction of the chair legs, the brain is chiseled out of the square socket, the legs are made into square tenons, and then socketed.

Seventh, dragon and phoenix tenon. One of the two plates is planed out of the tenon surface in the shape of half a silver ingot, and a large and small notch is chiseled out on the other side of the plate, and then the two plates are pushed and put together.

8. Chuck tenon. The legs and feet are higher than the surface of the tooth strip and the tooth head, the top of the tenon is out, the notch is chiseled, and the socket is combined with the socket on the bottom surface of the panel, and the tooth strip is embedded in the opening at the upper end of the leg and foot.

If it's the kind of small and subtle holes, it's probably eaten by insects, and the same is true of my solid wood sofa.

If it's new furniture, it's because the manufacturer hasn't handled it well; If the furniture is old or has been used for several years, please check for insect infestation.

Solid wood multi-layer board, this kind of board is equivalent to the solid wood layer accumulated and glued on, this kind of board rattling resistance, I personally think it is the strongest of all the boards (in the same quality case), this kind of board is usually more in custom furniture, but generally no one uses this as a model, after all, it is a little more expensive, of course, it is cheaper than pure solid wood. This kind of plate is still more recommended.

It is very likely that this plank has been eaten by insects, which is why there are holes in the eyes, and there may be insects in it.

Solid wood sofa in the processing of the base material to play a lot of eyes, you may be by the way more hit, anyway, in the place below can not be seen.

This may be due to the need for ventilation. It's like the rib board under our bed and under the sofa to ventilate and breathe.

Since it is a solid wood sofa, it means that it is spliced with a whole plank, so the hole on the bottom wood board may be eaten by insects, or the knots on the trunk, that is, the place where a small fork grows, so that when the wood is processed, it will form a small hole and fall down.

There are holes too.,If it's a solid wood plank.,It's probably a wormhole left by nature.,If it's a synthetic hundred, it's possible to accidentally poke and touch it in the middle.,As long as it doesn't particularly affect his strength and use,There's no problem.。

Generally speaking, solid wood furniture is a natural wood selected, and it is normal to have small holes, so you can leave it alone, as long as it is not an insect moth, you don't have to worry.

Solid wood furniture is made of natural wood, and trees may have scars or other pests and diseases during the growth process, so there may be small holes in the production of furniture, which is a normal phenomenon.

It should be convenient to install a deliberately opened hole in the production process, and the problem is not big and it is at the bottom of the sand.

That proves to be pure solid wood, which is normal for insect moths and does not affect the use of the base.

It is normal that the wood will have natural scars during the production process, and if you think it is not good-looking, you can ask the manufacturer to make up for it.

It is used for ventilation, people sit on the sofa and produce a stream of airflow, if there is no hole in the bottom plate, the airflow will be reversed, or there will be a pop pop sound, so some small holes will be made in the bottom plate during production.

It is normal to have holes in the wooden board of the bottom material of the solid wood sofa, which is the original insect moth on the wooden board, which does not affect the use. The wooden planks are insect-proof, moisture-proof, and dried before making sofas, so you can use them with confidence.

This hole may be a scar knot on the original wood, and in the process of sawing the plank, the scar fell off, leaving a hole, which can actually be patched with wood, and you can reduce the price because of this, but there is still no problem with using it

Hello, it's normal for a friend to look like this, maybe there is a little hurt when you are born quickly, and it doesn't matter if you have layers of holes.

Half of the oil scars on the solid wood planks are holes after they fall.

There are eyes on the bottom of the solid wood sofa, indicating that the wood is not too dry before making it, and there is a kind of insects that eat wood in it, which causes the wood board to have eyes.

It may be that the worker accidentally punched the wrong hole during processing, then it is a defective product and can be returned, or it may be that the wood itself has termites, and it is best to find a carpenter to help you see the site.

Solid wood boards generally have scars, even if they are trees, and if the tumor falls off, there will be eyes.