Do you need to make beautiful seams on the toilet wall?

The bathroom is a very humid place, especially in winter when taking a bath, the water vapor is more vigorous, and a lot of debris will accumulate in the tile gaps, in the face of these natural factors, it is still necessary to do the beautiful seams, especially the accumulation of perennial sundries in the tile gaps, which has an impact on the indoor and people's health.

Construction process. 1. First horizontal and then vertical: clean the gaps in the tiles (the wallpaper knife is placed horizontally; The blade is parallel to the edge of the tile; The blade is almost parallel to the ground).

approximate grooves; The sides of the groove can be exposed on both sides of the tile; PS: The cross must be cleaned up;

2. Clean the dust inside the tile gaps: sweep it with a vacuum cleaner or broom; It must be ensured that there is no moisture, dust and particles in the tile gaps;

3. Take out the corresponding color of the sewing agent: tear off the label on the buttocks, stick it to the bottle of the sewing agent, and pull the pull ring. Let the sewing agent stand on the ground, hold a nozzle of the sewing agent in your left hand, put the tip down on the discharge port of the sewing agent, cover the left hand holding the nozzle with a wet towel, and pat the nozzle a few times with your right hand to make it open the discharging port of the sewing agent.

The purpose of covering with a towel is to prevent the sewing agent from spraying out of the discharge nozzle ---there is pressure in the tank); Or use a sharp object to directly poke open the discharge port of the sewing agent;

However, be careful not to spray the sewing agent onto the wall, ceiling or body;

Screw the discharge nozzle to the discharge port of the sewing agent; Loading the glue gun; Prepare for gluing;

Wet the tiles on both sides of the tile gap with a damp towel; But the crevices of the tiles must be clean and dry (this detail must be taken care of!!

4. Hit a sewing agent: for novices, you can play 20cm---50cm first, and after gradually becoming proficient, you can play a longer length, and then put the glue gun flat; The bottom of the discharge nozzle is caught with a material receiving plate;

5. Scraping and sewing agent: (mainly using water scraper; with a sponge; Fingers are also available).

PS: Water scraper grip method; Four fingers on top, thumb under the water scraper, the excess scraped by the water scraper, transferred to the sponge.

Continue until all horizontal lines are scraped flat; The surface of the sewing agent solidifies in about 20 minutes; I feel that after the sewing agent is solidified, all the vertical lines can be done;

6. Within half an hour: use a wet towel to wipe off the residual grout on the tiles on both sides of the tile gap;

hours later; Normal use.

The above is the method of wiping clean after the sewing agent solidifies for half an hour;

There is also a method on the Internet that is to scrape the sewing agent and wipe it clean.

Tile joints can effectively solve the problems of blackening, falling off, and peculiar smell between the gaps of ceramic tiles.

The beauty joint will leave a layer of protective film in the gap of the tile, which can play a waterproof, mildew-proof and anti-fouling effect. If the decoration budget is okay, just make the beautiful sewing of the bathroom!

It is necessary to carry out beautiful sewing.

1. Beautiful seams can make the bathroom beautiful.

When laying floor tiles, there will be a gap of about 1 mm between the floor tiles and the floor tiles, and if you don't make beautiful seams, the tiles will not look continuous, but like cracking one by one. Especially the light-colored tiles are more obvious and very unsightly. These gaps can be filled after the sewing, and there are a variety of colors and styles to choose from

Choosing a seam that is similar to the color of the tile can make the wall look a whole, and if you choose a seam that complements the color of the tile, it can improve the style of the bathroom and make it look more comfortable.

2. The main purpose of the sewing is to be waterproof and moisture-proof, and easy to clean.

There are gaps between the tiles and the tiles, and if they are not beautifully sewn, a lot of dust will accumulate. Especially when the bathroom is damp, after taking a bath, it is easy to leave stagnant water in the crevices, and it is easy to breed bacteria, mold, and blackening after a long time. Unsightly is one thing, but even more serious is unsanitation.

The easiest way is to plug this gap with beauty glue to prevent stagnant water from remaining. At the same time, it can also play a certain role in preventing water leakage.

3. The beauty seam can also protect the floor tiles and prolong the service life of the floor tiles.

The glaze layer on the edge of the floor tile is very thin, and a piece will fall off if it is bumped slightly, which is very unsightly. If the gap is not filled, it is inevitable that you will bump into the corners and corners when you are cleaning and walking, and it is easy to damage the tiles. Moreover, the edge of the tile after the sewing is not sharp, and it is easy to get injured if there are children at home.

After the sewing of the tile, it is smoother and rounded all around. It also enhances the strength and wear resistance of the tile, and will not hurt the little ones.

In fact, about the bathroom wall tiling to do the beauty of the seam still depends on your personal importance to the aesthetics, the beauty of the seam it is for the sake of aesthetics and the role of the caulk is probably the same, according to the color of your home tile to decide. But no matter whether you do beauty sewing or not, because the bathroom is still exposed to more moisture, Tian Feng and the seal must be done for sure.

The best grout, OK, clean the seam, the grout is good to press into the gap with a shovel and fill it. The gap is cleaned 3 mm, and the glue type is filled with a beautiful seam agent to cure the shape. In this way, the entire tile floor forms a good-looking, high-grade waterproof layer.

The pipes under the tiles are not broken. It doesn't leak for a lifetime. The bathroom is tiled, and the floor drain is the lowest.

Note: Note: OK

It is necessary to make beautiful seams as long as the tiled wall surface needs to be made.

Yes. Suitable for bathroom tiles, ceramic all-porcelain tiles are used to meet the use of angles: the use of ceramic glazed tiles (commonly known as porcelain tiles) fully meet the requirements of kitchen and bathroom wall decoration quality quality

The quality of the whole ceramic tile its flexural strength, hardness, wear resistance than the glazed brick to the degree of construction difficulty: ceramic glazed brick is easier, the whole tile due to its density, construction specifications, non-existing tile loose falling off and other problems of construction cost said: generally speaking, the construction requirements of the whole tile are higher, and the construction cost is higher.

If you need it, you need to do it if you have high requirements for the bathroom.

Don't, it's up to you to think about it, and you can do it if you have the money.

Kiss Glad to answer for you: Does the toilet wall need to be sewn A: Kiss The reason why the bathroom does not do the sewing is mainly because the floor of the bathroom needs to be in contact with water for a long time, and the bathroom is a relatively humid environment.

If you want to do beautiful seams in the bathroom, you need to first understand the moisture rate of the containing cover of the construction environment, and at the same time, before doing beautiful seams, you need to clean all the dirty things in the tile gaps, and choose a beautiful seam agent with good waterproofness.