Do triple layer hardwood floors need to be waxed

Dear, I'm glad to answer for you: Do you need wax for three-layer solid wood floors Answer: Good afternoon rental cover! <>

Three-layer solid wood flooring needs to be waxed, and waxing is a must. It is necessary to choose a sunny weather for waxing, as the humidity is too high on rainy days and the waxing of the three-layer solid wood floor will produce white turbidity. When the room temperature is below 5 degrees, the floor wax hardens.

Therefore, it is important to choose to carry out floor maintenance work in a lack of fine weather. If you want to maintain the gloss of the floor, the three-layer solid wood floor type destruction board still needs to be waxed. However, there are also a few things to keep in mind when waxing a three-layer hardwood floor:

First of all, the surface of the parquet should be cleaned of dirt and trash before waxing. Dust can be removed with a vacuum cleaner or, if stained, with a neutral detergent. However, it is important to note that floor wax removers can cause stains and swelling in parquet and should never be used.

Secondly, in the process of cleaning, be sure to wipe the surface of the parquet, grooves and other parts carefully, and never leave detergent, if there is a residue, it will cause the surface to be white and swollen. Thank you for your patience. The above is my full reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best!

Peace and joy!

1.The choice of waxing for three-layer solid wood flooring is waxing in sunny and good weather.

The reason for choosing a sunny day is that the wax gets drunk, and the weather is constantly changing. On rainy days, the humidity is too high, and the waxing of the three-layer solid wood floor will cause white turbidity. When the room temperature is below 5 degrees, the floor wax hardens.

Therefore, be sure to choose to carry out floor maintenance work in fine weather.

2.Waxing of three-layer solid wood flooring removes garbage and dirt on the surface of three-layer solid wood flooring.

First, use a vacuum cleaner to remove trash and dust from the surface of the three-layer solid wood floor. Wipe the stains on the three-layer solid wood floor with a diluted neutral detergent. Hard-to-remove stains on the three-layer solid wood floor can be wiped with water.

To prevent detergent from accumulating in the trenches, wring out the cloth soaked in detergent as much as possible. Remind everyone that floor wax removers can cause stains and swelling on three-layer solid wood floors, and should never be used.

3.Wax the three-layer hardwood floor with a wrung out rag.

Use a cloth that has been wrung out vigorously to wipe it off. In particular, the surface of the three-layer solid wood floor, the groove part, should be carefully wiped without leaving detergent. If there is residual detergent and moisture, it will cause the surface to be white and swollen.

4.The three-layer solid wood floor is fully dried by waxing.

The moisture on the surface of the floor and the trenches is completely dry before waxing. The time required varies depending on the season, but it usually takes more than half a day. If it is not fully dried, the floor wax will not adhere tightly to the floor surface, affecting the appearance and producing whitening.

Peace of mind floor guarantee: as long as the three-layer solid wood floor waxing pays attention to the above matters, the three-layer solid wood floor will definitely be maintained to be shiny, and it will also prolong its service life!

If you want to maintain the gloss of the floor, the three-layer solid wood floor still needs to be waxed. However, there are also a few things to keep in mind when waxing a three-layer hardwood floor:

First of all, the surface of the parquet should be cleaned of dirt and trash before waxing. Dust can be removed with a vacuum cleaner or, if stained, with a neutral detergent. However, it is important to note that floor wax removers can cause stains and swelling in parquet and should never be used.

Secondly, in the process of cleaning, be sure to wipe the surface of the parquet, grooves and other parts carefully, and never leave detergent, if there is a residue, it will cause the surface to be white and swollen.

Then wait for the floor to dry, and then wax, although a bit time-consuming, but in order to do the best waxing and maintenance for the floor, it is also necessary to spend some time, after all, we spend a lot of energy and money when buying the floor, so we must do a good job of maintenance.

Finally, when waxing parquet, be sure to choose a sunny day. This is to prevent the floor from being waxed with excessive humidity on rainy days. In general, when the indoor temperature is below 5 degrees, the floor wax will harden. So, be sure to choose to wax on a sunny day.