-
Anonymous users2024-01-23There is a piece of plastic (or rubber part) under the green part of your toilet tank that is aging, and this soft fitting is not very close to the contact with the water outlet, and it causes water leakage, as long as it costs about 10 yuan, go to the building materials market, and replace it according to the specifications of the original.
-
Anonymous users2024-01-22There are many cases that you have to deal with earlier:
1.First turn off the main water switch in the house, and turn on a faucet to release the remaining water.
2.Buy a 4-minute angle valve and take the raw meal home First remove the hose on the bad valve, then remove the angle valve, and wrap the new angle valve clockwise around the raw meal belt about 20 times to install it.
3. Connect the hose again.
4. How to remove the float of the water tank? Can't you control the water level yourself? If it is, you can adjust it, and the benchmark of the fixed float will be lowered to the lower point, and if the float is broken, it will be equipped with another one.
If you're not sure, find someone who is familiar with plumbing, you can actually get it yourself.
Don't rush. Hopefully it will be resolved sooner.
-
Anonymous users2024-01-21The water inlet pipe is on the water pipe behind the toilet, and there is a figure-eight valve, just close it.
-
Anonymous users2024-01-20Find a way to move the float down and adjust the water level.
See what traps can move the float down.
You lift the lid of the tank, there is a cross notch at the top of the float valve inlet, you use the cone to reach in and turn right to the high water level, and turn left to lower the water level.
There is a screw-like cross at the top of the float valve, just turn left with a Rose driver.
The management of ponds mainly regulates the temperature through the depth of the pond water. From more than 10 days to the germination stage, the water depth is maintained at 40 cm, and then with the vigorous growth of the branches, the water depth gradually deepens to 120 cm, and the water depth is reduced to 50 cm again one month before harvest.
The level of the toilet tank directly affects the quality of the toilet flushing effect. If the water level is high, water will be wasted when flushing, and it will also affect the drainage effect; If the water level is low, it may not be possible to rinse it thoroughly. Therefore, it is very important to adjust the toilet tank water level. >>>More
Step 1 First of all, we lift the lid of the toilet, pay attention to be sure to hold it firmly, handle it gently, and do not bump it. >>>More