What is the reason why the kitchen socket tripped and pushed it up, but the socket was out of power

The layout of the new house decoration and the circuit is considered a hidden project. Because when you move into a new house, you won't see how the wires hidden in the walls are laid out. In addition, we need to pay special attention to the joint between the wires and the wires, if the electrician master makes the joint again, you must keep an eye on it to avoid them being sloppy.

For example, in the picture below, this kind of joint is very unsafe, and the copper core is exposed! In case of a spark, the consequences are unimaginable.

There are three more formal and safe ways to handle joints:

1. Spiral method.

To put it simply, it is to twist the joints of two wires into the form of screws, and 7 to 8 turns are good. Finally, the two wires that want to be exposed are bent backwards to prevent the screw ring from falling off.

Doesn't it look much more pleasing to the eye now? It can not only reduce the area of sparks from the wire, but also be safe.

2. Crimping cap anti-spark method.

The above spiral method is still a bit unsafe, while the wire cap method is much safer: use this white wire cap to cover the wire joint. This method requires professional tools, after wrapping the joint into it, use professional wire crimping pliers, and put the crimping cap into a safe and suitable position.

3. Fireproof adhesive tape method.

This method is very simple, you can buy fireproof tape in the mall or market, and wrap it directly around the wire joint. If you are afraid that it is not safe, you can wrap a few more layers.

With the development of science and technology to now, a professional terminal has been invented, please see the figure below! Just plug the bare wire into the terminal and you're good to go!

The kitchen socket tripped and pushed it up, but the socket was out of power because the circuit breaker of the superior also tripped, and it can be solved by finding that circuit breaker and closing it.

The kitchen socket ran out of power after it tripped.

Unplug the tripped electrical appliances.

The switch box at the door looks at the switch wrench and pushes it up.

The reason is very simple, although the air switch in your house is pushed up, there is also a leakage protector that is not pushed up, so there is still no electricity.

It's the upper level switch in the kitchen that tripped.