The kitchen electrical socket is dead

Updated on Kitchen 2024-02-06
5 answers
  1. Anonymous users2024-01-23

    It should be that the main switch in the kitchen is turned off, if it is not turned off, it should be a problem with the socket, see if there is a problem with the socket.

    Hope it helps

  2. Anonymous users2024-01-22

    Open your distribution box to see which switch trips, and then close it. If it doesn't fit, you need a professional electrician or a proficient person to help you troubleshoot the fault and restore the power transmission.

  3. Anonymous users2024-01-21

    1.Check whether the inlet head of the wire between the air switch connecting the air switch of the control socket circuit to each socket is not in good contact, such as whether the connecting wire end of the air switch connected to the socket is falling off or oxidizing, and whether the connecting screw of the thread is tightened;

    2.Check whether the air switch has tripped, if there is a trip, there may be circuit overload or short circuit.

  4. Anonymous users2024-01-20

    Then you need to check it out first.

    Did the leakage protector jump.

    Second, look at the problem with the line.

  5. Anonymous users2024-01-19

    Blackout? If there is no power outage, ask an electrician to connect it.

Related questions
2 answers2024-02-06

You should find an electrician to renovate for you to deal with it, the owner's indoor property company is not responsible, but you can try to call the property, and you may also come to check and deal with it.

1 answers2024-02-06

There are probably several possibilities for this problem, maybe the socket is broken, maybe there is a problem with the line, or maybe the line is in poor contact with the socket. First check whether the line has electricity, if the line has electricity, see if it is firmly connected to the socket, if the wire is connected to the socket is not a problem, then it proves that the socket is broken.

3 answers2024-02-06

The contact between the wire and the socket is not good, turn off the main power supply, and then remove this socket, the screws on the terminal at the back are loose, and you can tighten it. >>>More

3 answers2024-02-06

If the toilet socket cannot be used, you should find a professional electrician to measure it. If you have an electric pen or multimeter at home, you can measure it, the most basic is to have an electric pen, insert the electric pen into the jack to see if there is electricity, and see if the bathroom is empty and tripped. Or the wiring inside the socket is loose and falls off, resulting in no power.

1 answers2024-02-06

At least seven: range hood, gas water heater, kitchen kitchen, electric wok, rice cooker, juicer, oven, microwave oven, etc. >>>More