-
Anonymous users2024-01-23If the drainage in the toilet is slow, it proves that there is a blockage, dredge the toilet, if the water inlet in the storage tank is relatively slow, check whether the water inlet switch is fully opened, whether the filter screen is blocked in the water valve, close the angle valve and open the connecting pipe between the angle valve and the water inlet valve to find the filter screen to clean it, and if it is installed, you can find the property department to repair it if you can't repair it.
When you say water out, where is the water tank or slow water when flushing? >>>More
Ask someone to bring the water tank down above, something is blocked at the interface, and it will be fine to clean it up.
There are several kinds of <> drain valves, and the picture is for reference. If there is water in the water tank and cannot be pressed, it is a drain valve problem; If the water inlet is normal, the water tank cannot hold water, which is also a drain valve problem; If you can't get water, it may be a problem with the water inlet valve. FYI. (Image quoted from image).
If the toilet was originally unblocked, now this is the case, you don't want to dismantle the toilet first, you first go to the people below, negotiate with them, open the toilet water storage elbow above the ceiling of his bathroom, this place may have straw paper or something to block, if there is nothing in the water storage bend, please dredge a professional to dredge this level of pipe, I think it will definitely solve the problem, if this can not be solved, you ask a plumber master to remove the toilet, do not dismantle it yourself, the foot is easy to break. I hope you find my answer helpful.
Flush toilet drains slowly and has no suction: 1. The amount of water in the water tank is small, and the length of the pressure rod changes, which causes the water stop pad to be reset quickly to stop the water, and the length of the pressure bar can be adjusted to a suitable one. >>>More