-
Anonymous users2024-01-23Find a way to clean up the water in the toilet, use the vacuum cleaner hose to reach into the toilet mouth, open to the maximum gear and swing the vacuum cleaner hose left and right, it should be able to suck it out, the other way is to remove the toilet, invert it and reverse dredge, buy the toilet drain flange and install the toilet from the new, other ways are not easy to dredge out, you can't dredge it yourself, it is best to find the property department to dredge it
You can go to the supermarket to buy pipe dredging agent, and use it according to the instructions for use, the effect is good. Give it a try.
The easiest way is to add the appropriate amount of water to the toilet bowl and press the leather bowl at the toilet mouth with the help of a certain force of water. You can also buy some caustic soda to boil water, melt the caustic soda and pour it into the toilet, after chemical reaction, the dirt in the toilet bowl will be corroded, wait for ten minutes and then rinse it with clean water. You can also use a good quality plastic water pipe, connect the tap water at one end and plug it into the toilet mouth at the other end, and then block the toilet mouth with something like rags, and then turn on the tap water, which will use the water pressure to dredge the pipe.
If you can see a plastic shell, you can use a thick lead wire or something like a hook to catch the plastic shell and slowly move it up.
There are two ways to use, one is to pull out the toilet and take it, and the other is to flush it with boiling water to make it soft and run away, it is recommended to try the second method first.
Dredging with a pisai, if it is useless, you can only find a special dredging company, and if the community property has equipment, you can also find them.