The toilet has too much water, how to adjust it so that the water is stored appropriately?

Updated on Toilet 2024-03-13
4 answers
  1. Anonymous users2024-01-23

    Lower the float down a bit. If you don't know how to mix those two bottles of mineral water and put them in the tank, just put them.

  2. Anonymous users2024-01-22

    It is convenient to keep a bottle of water in the tank.

  3. Anonymous users2024-01-21

    You can lower the float downwards to reduce the amount of water you can store.

  4. Anonymous users2024-01-20

    Just put something in it that takes up space.

Related questions
7 answers2024-03-13

Toilet water level adjustment method:

There are two black columns on the toilet lid, this is the toilet water connecting rod, this can be adjusted to the length, used to control the strength of the toilet button, this should not be adjusted too long, so that the lid can just touch the blue and yellow blocks below. It can be adjusted to one long and one short, for example, you can press the small button on the lid when you are done urinating, and the drainage is relatively small. >>>More

1 answers2024-03-13

The water stored on the toilet is called a water seal, and without the water seal, the smell of the septic tank will run out with the drainage pipe, and then the home will be stinky.

2 answers2024-03-13

The toilet itself has a trap, and the sewer pipe can be installed with a door bend.

3 answers2024-03-13

Toilet water level adjustment method: the twist that controls the height of the buoy is to rotate the plastic rod, twist it by hand, and it will be adjusted to the height, and it should be adjusted higher according to your situation; Some are link ropes, and if the link rope is longer, the water level will be higher; It's not particularly difficult, it's very simple, and you can do it with your hands, I hope you succeed!

5 answers2024-03-13

Do your own experiment.

S-bend. P-bend. Put the words down. There's water. >>>More