-
Anonymous users2024-01-23Upstairs bathroom leakage I believe many people should have encountered, upstairs bathroom leakage, you live downstairs, you can first negotiate with the upstairs neighbors. Before the negotiation, we will first understand the cause of the leakage in the bathroom, and it will be more helpful for you to negotiate when you negotiate. So what to do if the upstairs bathroom leaks, and how to find the cause of the bathroom leakage?
First of all, it can be detected in an empirical way:
Keep not using water all the time, look at the water meter first, write down the number, and check it again after 2-3 hours, if it is a leaking water inlet pipe problem, you can see it quickly.
2.Drain pipe detection: find a water pipe connected to the faucet, let the water flush the water against the position of the floor drain, be careful not to let the water come to the ground, insist on 2 hours, and see if the water leakage downstairs will worsen.
3.Plug the floor drain, put water in the bathroom, and see if there will be water leaks downstairs.
What to do if the bathroom leaks, whether the water inlet pipe is leaking test 1Make a note of the data from the water meter, and this time is the time so that no water is used upstairs. 2.After two or three hours, check it again3If it is a leak in the inlet pipe, it will definitely reflect on the water meter. Bathroom leaks.
-
Anonymous users2024-01-22What material is used to fill the sewer pipe and hole around the sewer pipe and hole after the bathroom shower floor drain is penetrated. There are generally two methods:1.
Purchase matching rubber rings or hard leak-proof rings; 2。Homemade leak-proof ring: cut the pipe with PVC waste, then cut it into about 20mm sheets, and apply PVC glue on the inside to stick it to the PVC pipe through the middle of the floor slab.
The gap between the outer wall of the PVC pipe and the opening of the floor slab is filled with secondary fine stone concrete, and finally sealed with the plugging king or waterproof coating, so that there will be no water leakage.
The pipe is 50, but it is often uncomfortable due to insufficient slope and slight blockage of floor drain to the shower room. In order to improve comfort, it can be made as a half circle or a water ditch to make a water trap and not use ground drainage.
The reason for the problem is the cracking of the waterproof layer, the place where the waterproof cracking, according to your description, is the position of the connection between the waterproof layer and the drain sewer pipe, caused by cracking, after the tiles around the floor drain are smashed, the leakage plugging spirit is used again to paint the waterproof layer and the drain sewer pipe wall position.
It should be a floor drain and a toilet, and the surrounding area is leaking. >>>More
These bricklayers know what they know, so leave it to them. For floor drains, you can learn about the non-core floor drains designed using the principle of gravity.
This one is leaking and needs to be repaired. Otherwise, it will leak water downstairs. Your floor drain drain is under the floor drain, so it is also under the waterproof, and if there is a leak, it will leak from underneath.