How to paste crystal film with grooves on the solid wood surface?

What kind of grass is very difficult, so it is recommended that you still be careful. Don't break it.

Just put it on it and remove the bubbles, anyway, you have to replace it often.

Solid wood furniture is one of the most popular types of furniture on the market today. However, in order to seek greater profits, some unscrupulous businesses seize the shortcomings of ordinary consumers in wood identification and sell solid wood veneer furniture as pure solid wood furniture.

First of all, the contact surface of the paper and the furniture should be cleaned up, so that there are no burrs and no oil stains, and wait for a while after gluing (the time varies according to the different environments, which depends on the experience of the usual practice, generally the glue is not too dry, and the glue force is relatively large), roll the paper evenly with a cylinder, gently put it on one end of the sticky paper, and rush to the other end after squeezing it firmly, and wait for the whole paper to be glued after the bubbles stuck under the paper can be driven out, and the glue is dry.

Who has to fill the groove to put the film, otherwise it will be easy to fall off when pasted.

You can also paste the crystal film, you just need to find a person who specializes in this kind of film, and it is very convenient for people to paste it for you.

The grooves are leveled before coating.

Watching TV is like stretching and then blowing with a hair dryer.

This is better to make up for it with other materials, and the film is not easy to use.

Find a professional master to post it, so as not to waste things.