-
Anonymous users2024-01-23If the drawings require that it belongs to the scope of hydropower construction, but from a practical point of view, it is useless, as long as the hanging hole is done according to the specifications, and the waterproof will generally not leak.
If you want to knock out the old floor tiles for house renovation, then hire a small worker, if you want to lay floor tiles, then hire a mason, and if you want to slot and install water and electricity, then hire an electrician.
Toilet caissons are designed to be flexible in the layout of toilet facilities, and the drainage pipes can be changed according to their actual needs. At the same time, the waterproof treatment requirements of caisson toilets are higher, and the construction difficulty and cost will be higher.
You can go, but it is not suitable for later maintenance, and the kitchen and bathroom have suspended ceilings. It's good to walk on the top side.
After the toilet is sealed with the riser, in addition to the common tiles, there are many materials to choose from,-- according to your design effect, ease of use, cost, etc.: >>>More
The bottom of the riser pvc110 tee is 30-35 cm away from the top plate surface, the expansion joint is installed below the tee, the floor drain and shower are all using the S bend with a cap, the basin is installed with a 90-degree cap elbow, and the S bend can be deodorized when installing the basin on this floor, and the kitchen sink drainage branch is installed on this floor, and the P bend with a cap is directly installed, I hope it can help you. It should also be noted that the smaller the distance between the tee and the top, the greater the net height of the bathroom.