My toilet is broken, two buttons. The one on the right can t be bounced, and the one on the left is

Updated on Toilet 2024-03-10
7 answers
  1. Anonymous users2024-01-23

    It is related to the quality of the product, it cannot bounce because the spring elasticity is not good, and it is loose because it is not locked.

    Buttons produced by regular manufacturers do not appear within the expiration date and the specified number of uses. However, some manufacturers have poor production quality, and the use time and shelf life will be relatively short.

    Workaround: Open the tank cover, push the two ejector pins from the concealed side, push the top press down, and reinstall. Then find the hidden pump button in the middle, turn it clockwise, and lift the button away from the hollow part of the pump body.

  2. Anonymous users2024-01-22

    The float valve jammed and opened on the toilet.

    Du cover, pull the float up into place

    You can check the cause of the stuck dead spot DAO and clean the dirt back from the tank.

    Working principle: after pressing the flush water switch, due to the drop of the water level, the float falls at the same time, when the float reaches the lower limit, the water injection switch is turned on, and the water is automatically loaded, although the water level rises, the jacking is jacked up by the water, and when the float reaches the upper limit and the water injection switch is lifted at the same time, the water injection is closed. The reason for you is that the float gets stuck when it reaches the lower limit after flushing, and the float cannot be jacked up when the water level rises, resulting in water filling all the time.

  3. Anonymous users2024-01-21

    The toilet is broken, two buttons. The right one can't bounce up, and the left one doesn't respond when you press it. The toilet just kept dripping. The spring is rusty and broken. The toilet in my house is also broken like this, replacing the entire button.

  4. Anonymous users2024-01-20

    Flush toilet in the back lid.

    There's a ball on the surface, and when the water is full, the ball will float, and the button will pop up, and when you press the button, the water will come back.

    When it is released, the ball will be answered, and then it will be filled with water like a faucet, and the water will float up at a certain position, and the button will pop up, you first close the water valve, open it and look inside, it is possible that the ball is broken......Or something else, then the reason can't be played.

  5. Anonymous users2024-01-19

    Remove the button on the toilet lid and take it to the plumbing store for one, no more than ten yuan.

  6. Anonymous users2024-01-18

    The float is not good, the cheap toilet has this problem, you may be able to make it easy to tinker with yourself, but it is really not good to buy a float for people to change.

  7. Anonymous users2024-01-17

    Open the lid and take a look.

Related questions
11 answers2024-03-10

These two buttons, one large and one small, represent the function of full water and half water drainage, respectively, the small is the state of half water, so when you press it, all the water in the tank will not be drained, but only half or one-third of it. Then the big button is very solved, it is a button full of water, when we press it, we can drain all the water in the tank at one time. >>>More

6 answers2024-03-10

For the sake of water saving, a small flush of water is used for the post-flush of the urine, and a large flush of water is used for the post-flush of the stool.

10 answers2024-03-10

You take off the toilet tank cover, see a cylinder inside, you see that the button does not bounce up, you press it and it pops up, you press a few more times, it is easy to use, you pour the toilet cleaning things into the cleaning point to clean it can be used for a long time, remember to press vertically when pressing in the future, it is not easy to break, the usual use and maintenance is very important.

1 answers2024-03-10

Three large. The triangle symbol on the two flush buttons of the Omeikang toilet is three flush volumes.

1 answers2024-03-10

Part1: Why does the toilet have two buttons?

We use the toilet every day, but have you ever wondered why there are two buttons on the back of the toilet? What's the difference between the two buttons? Occasionally, I changed the toilet at home and listened to the master of the toilet bowl after I understood, and I was embarrassed in an instant, thinking that I wasted so much water, and all that flowed away was money! >>>More