What matters should be paid attention to in the decoration of bathroom pipes, and how to wrap the to

1. How to package the decoration of the toilet sewer pipe.

1. Wrapping it in bricks is not necessarily the best way. Each one is different and can be approached differently. Tile tiling, cement board, etc. The advantage of using brick wrapping is that the sound insulation effect is good.

2. A friend sues one of the best-looking and easiest ways, and you don't have to do it yourself, find a home to make artificial stone and let him make one, not much money. Moreover, it is waterproof and moisture-proof, and easy to disassemble and assemble.

3. The water pipe will take up a lot of space, and the artificial bark package for the home water pipe is very beautiful and very simple, and it is convenient to disassemble and assemble the water pipe blockage in the future.

4. You should move the squatting out a little, and then build a red brick wall to wrap the pipe and then paste the tiles.

5. The wall of the bathroom must be pasted with wall tiles, so the sewer pipe must be paid attention to the wall after the wrapping has a certain tensile force to ensure that the wall tiles will not fall off and hollow after pasting, the traditional way is to use light steel keel cement pressure plate, the earliest wooden keel cement pressure plate but now these processes are basically no longer advocated to use, now should use red brick masonry and play expansion bolts on the new masonry wall and the original wall to ensure that the new masonry wall and the original wall can be better combined, In this way, there will be no hollowing and brick dropping.

2. Bathroom sewer pipe installation.

1. After the installation of the water pipe, the pressurization test must be carried out: the pressurization test is generally carried out under the condition of double water pressure, and there should be no water leakage in the test.

2. A simple test method without pressurization, but it is not completely feasible.

1) Close the main valve of the water pipe. (i.e. the water pipe switch in front of the water meter).

2) Turn on the faucets in the room for 20 minutes, making sure there is no more water and turn off all the faucets.

3) Turn off the water inlet switch of equipment with water storage function, such as toilet tanks and washing machines.

4) Open the main valve of the water pipe.

5) 20 minutes after opening the main valve, check whether the water meter is moving, including slow walking.

The above is some sharing about the decoration of toilet sewer pipes, and it should be noted that it is recommended that the water pipe is the safest to go to the top. The main reason is that most of the waterway reconstruction is done by dark pipes, and the characteristic of water is that water flows to a lower place. If the pipeline goes underground, it is difficult to find a water leak in time.