What should be paid attention to in the renovation of kitchen sewer pipes

Updated on Kitchen 2024-01-27
2 answers
  1. Anonymous users2024-01-23

    1. Pay attention to the adhesive at the interface, the adhesive at the interface is very important, when we carry out the sewer pipe transformation and brush the glue, we must first clean up the muck at the interface with a towel, and brush the glue to brush the inner circle of the pipe fittings and the outer circle of the pipe with glue, pay attention to remember not to be lazy and save trouble, otherwise it may lead to leakage of the sewer pipe.

    2. Pay attention to the mastery of the slope, we must master the slope when installing the sewer pipe, generally require the water inlet to be higher than the water outlet, and there is no strict requirement for the slope ratio, as long as you pay attention to the principle of not raising the ground after the installation of the sewer pipe, after all, the new houses in the city are low enough.

    3. Be careful not to be too long, experienced plumbers know that the longer the sewer pipe, the more unfavorable the drainage, especially the flat pipe. If the pipe is too long, it is easy to clog, and it is not easy to repair if something goes wrong.

    If you know the right tips to unclog your kitchen drains, you can fix it yourself even if the pipes are clogged in the future. Learn what to look out for when repairing kitchen sewer pipes, so you won't make any more mistakes in the next repair.

  2. Anonymous users2024-01-22

    Some families may change the water pipes when decorating, especially if the kitchen at home is an open kitchen, the change will be greater, and some families may also remove the wall to make an open kitchen.

    At present, whether it is an open kitchen or a closed kitchen, there are water pipes, most of the kitchens are double pipes, whether it is a water pipe or a sewer pipe, it is designed by the developer in the construction of the house, and it is generally not recommended to change the water pipe significantly when decorating.

    For example, when decorating, there are many changes to the sewer pipes, and the sewer pipes have already been designed in the original house structure, and the length and inclination of the pipes are all done by engineers in the design of the house.

    If the owner changes the sewer pipe at will, it is easy to cause poor drainage in the kitchen, of course, if you have to modify the sewer pipe, then pay attention to the following aspects.

    1. The diameter of the pipe.

    When changing the pipeline, be clear about the diameter of the pipe you want to change, and replace the pipe according to the diameter of the original pipe when replacing the pipe.

    2. Pipe connection.

    When moving the sewer pipe, carefully check what is used to seal the connection of the pipe, and if it is changed, whether the items in the seal need to be replaced, these are also the areas that the owner needs to pay attention to.

    3. Anti-water bend.

    The main purpose of the bend is to store water and then isolate the air from the sewer pipe, which is conducive to preventing odor or garbage from entering the water pipe.

    4. Inclination.

    When replacing or changing the sewer pipe, be sure to understand the inclination of the sewer pipe, and try to replace and transform it according to the original inclination.

Related questions
4 answers2024-01-27

How far is the original kitchen from the balcony, if not, you can direct the water from the balcony to the original kitchen!

3 answers2024-01-27

OK. However, it is best to have some slope to allow for smooth drainage. If you walk directly on the ground, you need to pay special attention in the future, and you can't drain any residue out of this pipe, otherwise it will easily cause blockage.

2 answers2024-01-27

This is not certain, it depends on the requirements of the actual transformation and the difficulty of construction.

1 answers2024-01-27

The cost of modification is different in different places, and the cost of modification is related to the difficulty of modification and the total amount of work.

7 answers2024-01-27

In the early stage of hydropower transformation, there must be a detailed construction budget and construction drawings to avoid adding items in the later stage! When signing a contract, it is also necessary to indicate the brand and specifications of construction materials, so as to avoid invisible consumption and cutting corners.