What should I do if the downstairs bathroom is leaking and upstairs

Updated on Bathroom 2024-01-27
6 answers
  1. Anonymous users2024-01-23

    There must be a problem with the waterproofing of the bathroom, it must be done again, there is no other way, it is estimated that the water pipe also has a problem, it is recommended to test the pressure of the water pipe before doing waterproofing, to see if the water pipe leaks.

  2. Anonymous users2024-01-22

    Dear, this kind of thing is common, and you have to pay for it yourself. If the problem is small, plug the leak with polyurethane, and if the problem is big, redo it all.

  3. Anonymous users2024-01-21

    It is estimated that there is a problem with the waterproofing of the bathroom floor. It is better to re-waterproof the ground, which is a one-and-done solution.

  4. Anonymous users2024-01-20

    Try a closed water experiment and see if you can figure out what the problem is.

  5. Anonymous users2024-01-19

    I can only call the maintenance worker to repair.

  6. Anonymous users2024-01-18

    Communicate with the downstairs to repair it, and let the people from the hairy ant company take a look, it should be easy to solve.

Related questions
1 answers2024-01-27

First of all, find out the location of water seepage and apply a high-flexibility waterproof coating, which has toughness, is not afraid of water pressure, and is suitable for the turning position.

20 answers2024-01-27

Only by knocking the tiles and digging up the waterproof layer and then re-doing the waterproofing can completely solve the fundamental problem. >>>More

3 answers2024-01-27

First of all, determine whether the wall seam seepage goes down, and to understand whether the bathroom is sunken, whether the waterproofing of the bottom plate below has been done, you can first use epoxy seam glue caulking to see the effect, if it is a small area of water seepage of a single-layer prefabricated board, you can also use UD001 high-strength special impermeable material on the ceiling roof downstairs to do the backwater surface impermeability, and the specific implementation requires a professional waterproof plugging master.

13 answers2024-01-27

The leakage is not because the cement layer is not thick, it is the reason why the waterproofing is not done, the only way is to knock out the floor tiles, re-do the waterproofing, and then re-lay the bricks after the test. If there is no bathroom with a shower wall, the waterproof side of the shower wall must be meters, and the other three walls must also be meters.

8 answers2024-01-27

The methods for water seepage treatment on the bathroom wall include determining the location of the pipe, increasing the height of the waterproof layer, glue plugging and so on. >>>More