The bathroom is separated from the shower, and the side of the toilet and washbasin can not be tiled

Updated on Bathroom 2024-03-20
1 answers
  1. Anonymous users2024-01-23

    Generally, it is better to stain bricks as a whole, although it is dry and wet separation, and the moisture must evaporate outward after opening the door.

Related questions
Shower room, shower room, bathroom floor, and wall joints to seep water
3 answers2024-03-20

In this case, there are two possibilities for water seepage. >>>More

The bathroom door is facing the door, but there is a strong load-bearing space in the middle, is it
5 answers2024-03-20

Although the bathroom door is facing the main door, there is a wall in the middle. Completely covered, that's okay. Nothing has an impact.

Bathroom washbasin and squatting sink? Do you share a sewer pipe?
1 answers2024-03-20

The washbasin and squatting sink in the bathroom share a sewer pipe, and the water from the washbasin is directly connected to the urinal.

With a gas water heater, there is hot water in the kitchen and bathroom washbasin, only the shower c
3 answers2024-03-20

This should be the shower mixing faucet inlet filter screen has impurities blocked, close the main valve to remove the mixing faucet and clean the filter screen, when disassembled, cold water pipe, hot water pipe two som to rotate the same number of turns at the same time, that is, after turning the cold water, turn the hot water, it is easy to operate, try it, you can not repair it can find the property department to repair.

As soon as the range hood is started, the bathroom washbasin smells thick and is the reason
3 answers2024-03-20

Then it is possible that the sewer pipe of the toilet and the sewer of the washbasin are not equipped with a bend (a bend to prevent air from pouring in), and when the range hood is exhausted, the smell of the sewer is extracted from there.