Shower room, shower room, bathroom floor, and wall joints to seep water

In this case, there are two possibilities for water seepage.

1. Leakage of the upper water pipe The leakage point should be in the water pipe connected to the basin leaking on the wall and then penetrating into the ground After a certain amount of storage in the ground area, because the ground has a waterproof layer, the water cannot penetrate on the top, so it can only penetrate from the bottom to the top.

2. The problem of the drain in the bathroom shower room The drain interface of the toilet shower room is not in the original sewer pipe position Slightly off The interface part of the waterproof is not treated well The bath time is long Too much water penetrates into the ground through the floor tiles After accumulating for a certain period of time, more water will penetrate down and will come out from a low position (In addition, if the bathroom is a bathtub, it is better to explain that the bathtub drain is blocked, and the water overflows when the bathtub drains and stays on the ground under the bathtub and slowly penetrates and emerges from the ground)

In this case, it is recommended that you first find a professional to test the pressure pump through the water pipe pressure test, and then analyze what to do, and by the way, also check the condition of the shower room or the bathtub drain.

Check whether there is a leak at the interface of the water pipe or faucet, and you can use ink or colorant to test the source of the water. If it is seeping out of the wall and the ground, it should be taken seriously, and ask the muddy water and hydropower master to open it and deal with it. The main problem of water seepage on the wall and floor is the dark water pipe.

You should look at whether it is a problem with the water pipe, and you can do dry and wet separation!