How to fix the leakage of the toilet case

This is because the plug did not reset with the flow of water when you flushed the toilet last time, you only need to press the flush button again with your hand, and hear the sound of popping in the water tank is the plug reset, and you will not have this situation again when you flush the water in time, please adopt.

Bathroom master analysis:

Step 1: Make sure the toilet close-off valve is in the closed position. >>>More

Water seepage at the edge is caused by poor drainage pipes, as long as the drainage is well dredged, there will be no water seepage here.

After cleaning the tile joints, try a new type of waterproofing material"The water does not leak"to see if it can meet your requirements, see the instructions on the packaging bag for specific methods.

There are two possibilities: one is that the sealing ring of the vertical pipe in your water tank is damaged, and the maintenance method can only replace the sealing ring of the vertical pipe with all the sealing rings, or after draining the water, after the pipe wall is dry, stick it to death with two-to-one glue (a groove is rotten, and then it is broken, the vertical pipe must be removed destructively). >>>More